(6) bottle Mori Gravity-Fed Bottle Filler, stainless steel Has always worked great. We are upgrading our bottling system but this is a great gravity-fed bottle filling system. The unit must sit on a table and you will need a pump to move your liquid into the unit and then the bottles fill, via, gravity, to whatever level you want in the bottle. Priced to go since our new bottling unit has arrived.
Includes the following: 48″ Rotary Feed Table Glasspak66 Automatic Beer Bottling and Capping Solution – Rotary 18 head, counter-pressure style bottle filler – Monoblock System, continuous motion, rinses, vaccuums, purges, fills, caps and rinses. Automatic Bottle Dryer – Adjustable Air Knives Built in 2017. Available 1Q of 2021.
This is a 5 head filler line that can run up to 35 cans per minute. It includes an exterior can rinser and dryer, interior can twist rinser, automatic depalletizer, collection table & lynx date coder. It has light use and was only in operation for 1 year. Please contact us if you are interested.
XpressFill 2-Head Filler Adjustable bottle height Automatic start when bottle is loaded Automatic shutoff (fill height detection) Automatic CO2 purge upgrade Includes variable flow rate valve upgrade Includes inline pre-filter Pump-based. Does not require pressure on the liquid to fill. Does not work for carbonated beverages. We used this for bottle-conditioned beers. Located in Denver. Local pickup preferred. Contact firstname.lastname@example.org.
This is a Wild Goose WG-2 Evolution Series 2 head canning line. Original price $92,255. This unit is on casters and can be rolled around while not in use. It is in excellent shape and can operate at 30 CPM. It was installed on 3/20/2019 and used for 8 months until 11/27/2019. The canning line has only run 121,054 cans through it, which is documented on the menu screen. Also comes with Whale Tail - Manual Sweep, Inlet Pressure & Temperature Monitors, Standard Can Size 12oz / 16oz, Rinse Tunnel & Air Nozzles, Ingersoll Rand Refrigerated Air Dryer - 15 CFM, Model# 23231814 and installation/training videos. We used this line with a Ska Fabricating Half Pint Mobile Depal and a Domino Inkjet for coding.
2017 Cask MCS canning machine for sale. We are upgrading to a more automated machine and no longer need this one. This has been a dependable machine for us and a good way to get into canning for a small brewery. It would be best if you could pick up the machine in Vancouver, WA but if that does not work we are willing to assist with the crating and shipping (buyer to pay for shipping)
Complete package: Martin Robotics 8-shooter counter pressure filler, with Auto rinser, Labeler and Pack-off collection table. This bottling line does all sizes with the push of a couple of buttons. We used primarily 22oz bottles and averaged 20 bottle/minute. 12 oz bottles reach 25/minute. Easy to use interface for all controls. Please email Todd@pocockbrewing.com for more info and videos.
CBK Fillers ASFC-1-1 V1 Automated Single Filler Crowner. I bought this to bottle cold brew coffee, but the project never got off the ground. I have replaced all cylinders and sensors that were not working and the unit cycles. Probably needs a little tuning to get working best. Also have the software that allows one to access the PLC programing. It uses CO2, compressed air and standard 120V plug in (less than 20 amps). Sold as is because it needs some tuning to run optimally. I will package the unit on a pallet for pickup and will load on a truck at my business location with forklift. If you pick it up in person, I will include 2500 12 oz bottles. $7000 or best offer.
This has been a work horse! Well maintained WG4 with a 5th head upgrade. 50 cans p/m. Setup for 12 oz. sleek can, 12 oz. standard, 16 oz and 19.2 oz 202 can body style. $120K Also available (1) paktech cca 120/180 -- ready for 6 packs, 4 packs ($25k)
90's era 4 head meheen bottling line. we used it for approximately one year. good cheap way to get into packaging, but you have to be good with a wrench. was operational when we quit using it this January. uses 12 oz heritage bottles. asking 10,000 obo.
4 Head Bottle Filler Easy Set Up, Filling, and Clean-up This bottle filling design has been successfully used in production beer facilities for over 25 years. We always had to find a used one or make our own. No one was offering this product on the market, so the last time we needed one, we decided to manufacture and market new, quality stainless steel bottle fillers to the small wineries and breweries market. Purchased new for $2400 http://easyfillermanufacturing.com/index.php Less
We’ve finally upgraded our canning line and are selling our Cask ACS and associated equipment, available immediately. We used it up until April of this year. This particular unit was manufactured in 2007 for Buckbean Brewing Company and was part of our acquisition of Buckbean assets in 2012. We’ve used the line since then for 12oz cans. The seaming setup was outfitted with new rolls and a chuck from American International Tooling last year, along with a new seaming table and new clutch/brake on the motor. The unit has seen about 46,000 cans since then. Included is a customized lift for full pallets of cans, 12oz twist rinse, and filler with can rinser and dryer. We do not have a twist rinser for any other can sizes, but we do have the blocks to move the seamer up to the proper height for 16oz cans. We were averaging 25 cpm...
Used, Krones 20 valve filler. Pictures to come. We are selling the whole package; this includes Filler / Crowner Rinser Labeler Drop Packer Pack-On Table Supporting Conveyors Was running beer at 100 / per minute - top speed could be 140 depending on product. Ready now to rig out and ship - shipping is buyer's responsibility. Asking price is open for discussion - call or email!
Like New 2017 Meheen M6 w/Labeller. Set up for Stubbie Bottles (BN017) Unit has less than 10,000 bottles run through it (2-3 skids). Comes with all spare parts that shipped with the unit when we purchased new from Meheen. M6 Filler with Labeller $80,000 CAD plus shipping M6 Filler only $70,000 CAD plus shipping Please email if interested. Located in Calgary, Alberta, Canada. All reasonable offers will be reviewed.
Great condition, link to photos here. Link to manual here. Features: Pulse Washing Steam Sterilizing and/or sanitizing sequences Chemical & Water reservoirs for flow control Programmable cycles Variable counter pressure filling
Four head XpressFill 4400 can filler and Oktober seamer for sale. Ideal for small batch runs or to start canning from your brewery. The XF4400 filler is based on our level fill unit with a gas purge cycle and switch that initiates the flow once the can is placed on the shelf. The carbonated beverage filler is a open fill system that fills cans from a pressurized source, such as a keg or brite tank, using a sensor probe that shuts off the fill at the desired height. The fill cycle includes a pre-fill purge with CO2 in reduce the oxygen intake. The Oktober seamer includes chucks suitable to can both 12oz and 16oz cans. Asking $4500 and buyer to pay shipping costs.
We are selling our MacDonald Steel HDP DFC2 Deluxe automatic counter-pressure bottle filler with automatic crowner. It has the touchscreen interface and comes with various size bottle holders for the shuttles. Only selling because we have switched to mostly canning and bottle conditioning so we don't use it anymore. Lightly used and in very good condition. Does not include the table shown in the pictures. Comes with all the original fittings for CIP jumper and beer and Co2 connections. Asking $12,900 OBO
1997 Meheen 4 head bottler for sale. This is set up for 12 oz Heritage bottles and was a workhorse for us. Comes with bottle sanitizing station.