Comac Smartblock 6-6-1 plus inline labeler and printer and two large accumulation tables. The newly refurbished line just arrived from the factory in Italy. It is an isobaric (counter pressure) filler capable of filling cold or ambient temperature liquids. It has new motors for the Smartblock and labeler/infeed table, a new capping unit, updated PLC and documentation and runs on 208v 3 phase. The unit is still crated and ready to ship!The line was purchased a year ago with plans to ramp up production but those plans have since changed. This unit has been factory tested with change parts for 12 oz, 33 cL, 50 cL, 750 mL champagne, 750 mL burgundy, and 750 mL California hock bottles.Comac makes extremely high quality beer packaging equipment. This line was completely gone over and tested at the Comac factory and works like it is brand new. It also comes with a service...
CBK Filler IFC 6-6 Automatic Filler and rinse table for sale. Fully automated counter pressure filler for filling 12 ounce long necks and 22 oz bombers. Double evac CO2 and automatic crowner. Comes with a 24 bottle rinse table for both sizes. Currently set for 12 oz but can be changed out for 22 oz bottles. We achieved a fill rate of approximately 12 cases an hour. Manual load in and out of bottles. Machine works great and has been lightly used! We bought it with the intention of growing distribution and our business model has changed so we will no longer need it. Original list price was $60,000 new. Asking $29,500. You pay shipping from Reno, NV (89511). We will ship in the original manufacturers crate. One stop shopping; we have 4.5 pallets of bottles for sale also!
GAI 3031FM BIER RINSING - PRESSURE FILLING - CROWN CAPPING MONOBLOCK This bottle filler was purchased new in 2014 and has been in use at our brewery since. This machine is well-built, reliable and consistently produces high quality fills. Currently setup for 12oz (355ml) bottles and includes change parts for 22oz (650ml) bottles. The filler is available on its own or with our pack-on table, pressure sensitive labeller, general conveyance and pack-off table. OUTPUT: 1,200 litres/hour SPEED: Up to 3,000 bottles/hour Price is firm. Buyer pays for shipping and crating. Serious inquiries only.
Item Type: Case Erector Manufacturer: Pearson Model: CE-25T Year: 2009 Last Use: Distribution Plant Dimensions: 10x5x6 Condition: Good Unit was purchased in 2009, Utilizes Tape to Seal Boxes, Speeds 15-20 cases per minute (depending on case size), Allen Bradley CompactLogix L31 PLC, Stack Vertical Blank Magazine, Makes cases from 8.75 inches to 23.50 inches in length, 5.00 inches to 16.00 inches in width, 5.00 inches to 21.00 inches in depth, adjustable machine, 230/460 Voltage, 60HZ, 3PH, Six Machines Available to Choose From
Item Type: Accumulation Table Manufacturer: Ambec Model: 6 x 12 Last Use: Bottling Dimensions: 6 x 12 x 4 tall Last used in dairy plant for round HDPE Bottles, Stainless Steel Construction with Plastic Belting, Center Drive Motor, Good Condition
Item Type: Multi Stuffer Manufacturer: Pearson Model: S 1135 Last Use: Brewery Dimensions: 4 x 4 x 7 Condition: Good Last used for 12oz. glass bottles, Stuffs (4) 6 Packs into 24 count motherboard RSC Case, Interconnecting Conveyor with Advancing Brushes included, Year 2001, Stuffer packs up to 30 cycles/minute, Good Condition – well maintained, 460 volts, 3PH, 60HZ
Item Type: Cartoner Case Packer Manufacturer: Jones Model: Meridian MPSC-210 Serial: S-6245 Year: 2008 Last Use: Beverage Cans Dimensions: 35x6x8 Condition: Very Good Unit was purchased new in 2008, Last running 12oz. Aluminum Cans, Allen Bradley ServoLogix 5561 PLC with Panelview Plus 700 Operator, Allen Bradley Kinetix Servo Drives, Horizontal Infeed Blank Hopper, Last ran 12 Pack Fridgepacks, 18 Pack Suitcase and 24 Pack Suitcase, Quick Change-overs, Stainless Steel Construction, Nordson ProBlue 15 Glue Unit – 6 to 24 pack configurations – Speeds up to 210 cases/minute – Can sizes from 8oz. to 16oz. – Tool-less changeover – Stainless steel, debris fall-through design – Servo driven dual pitch transport – Automatic (CIP) chain cleaning system – Auto chain oiler on transport chains – Compact 24.5 ft. frame length – Cycle stop ap closing – 12” machine centers – Three head rotary carton feed – 8 ft. carton magazine – Versaview...
Used, GAI 16 valve filler with 3 head corker available now. New in mid-90's model 4000, it's in very good condition, ready to package your wine or other still beverages. It is not designed for carbonated liquids. Asking $25,000, and open for discussion. Also available for additional $$, and not pictured here, 24-spout Rinser and 8 head Spinner - both GAI and can work with this filler / corker. Freight is the responsibility of the buyer, ships from Northern Calif.
Item Type: Can Filler Manufacturer: Crown – Angelus Model: Uniblend 72 – 120L Last Use: Soft Drink Dimensions: 20x8x8 Condition: Fair Last ran soft drinks on 12oz. cans up to 1100 cans per minute, Setup for 202 lids, Missing In-motion timer, Includes Lube Panel and Control Panel with Allen Bradley MicroLogix 1100 PLC, Tipless Valves on Filler, Mounted on Common Frame
Item Type: Case Erector Manufacturer: Pearson Model: R208 Year: 2004 Last Use: Beverage Dimensions: 20 x 6 x 8 Condition: Good Unit was purchased new in 2004, Allen Bradley SLC 5/04, Infeed Blank Hopper, Nordson ProBlue Glue Unit, Speeds up to 30 Cases/Minute, Makes cases from 10 inches to 23 inches in length, 5.00 inches to 16.00 inches in width, 5.50 inches to 22.50 inches in depth, adjustable machine, 460 Voltage, 60HZ, 3PH, In Production up to April 2019
Item Type: Carrier Erector Manufacturer: Pearson Model: BE60 Serial: 201310011343RF Year: 2013 Last Use: Cidery Dimensions: 10 x 2 x 6 Condition: Like New Purchased new in 2013 – last running at Cidery plant, Very Good Condition, Can erect four, six, and eight pack carriers at speeds of up to 60 carriers per minute, Allen Bradley Controls
This sale includes an 18/18/6 Glasspak 66 Rinser/Filler/Crowner, Rotary Depal Table, Pressure Sensitive Labeler, Markem Imaje 9028 Date Coder, Crown Hopper and Elevator, Post Rinse Dryer, and Pack Off Table, Diaphram Pump, and spare parts. Everything you need to package. This unit runs 66-70bpm easily and up to 74bpm depending on the beer. It is set up for 12oz standard longnecks currently and has all changeover parts for standard 22oz bomber bottles. The rinser, filler, and crowner are all adjustable to accommodate most any standard bottle size. Double Pre-evacuation of bottles prior to filling. We average about 40ppb O2, we’ve seen bottles as low at 16ppb using our Anton Paar Cbox. PLC Touchscreen with user-friendly controls. We have this line setup in a semi U configuration to take up the smallest amount of space possible, approx 330” x 185”. It could also be set up in a straight line configuration...
This bottle filler has been as reliable as we could have ever hoped for and it is sad to see it go, but we just aren't using it enough. DO pickup is typically 10-20 ppb running a max speed on 341mL bottles. We also have the changeover parts for the standard 650mL bomber bottles. It has ~7,000 hours of operation. It was decommissioned in Jan 2020 by a Krones technician. We have some video, more pictures, and maintenance records from Krones that we can supply if requested. Please let me know if you're interested. PS: We also have a Kosme cold glue labeller for sale in another ad.
16-16-6 Gongda Counter Pressure Rinser/filler, up to 4400 bottles per hour Set up for 12 oz with 16 oz changeover parts 1/2 pallet height depal and conveyors by Northwest Conveyor Canada Inline Labeler with hot stamp date coder Air Knife bottle dryer Rotary off load accumulation table Eagle Case taper
Item Type: Complete Beer Can Filling Line Manufacturer: Palmer Canning Model: 24-4 Year: 2017 Last Use: 12oz. and 16oz. cans Dimensions: Available upon request Condition: Very Good Palmer rates this line at 200cpm, capable of 12oz, 16oz, and 19.2oz. In production for 12 and 16oz only. The can line is rated for 180-200cpm. Last in use around 100-150 cans/minute. Line was purchased new in 2017 for $570,000. Machinery still in use until sold. Buyer pays for rigging and shipping expense. Features the following assets: EMPTY CAN DE-PALLETIZER AND IN-FEED CONVEYANCE (Items 4.1 – 4.5) De-Palletizer (Item 4.1) De-Pal Discharge Conveyor & Single Filer 18” x 180” (Item 4.2) Mass Flow Conveyor 44” x 56” (Item 4.3) Compact S-Line Empty Can Ionized Air Rinser & Gravity Drop Fittings (Item 4.4) Filler In-feed Conveyor 3.25” Table Top (Item 4.5) CRAFT BLOC 24/4 FILLER & SEAMER (Item 4.6) Seam Measuring & Set Up...
We have a GAI 12-head Monobloc 3031 FE-BIER bottling machine and the GAI 6050E labeler for sale with a Domino V230i date-coder with the corresponding touch-screen that thermally transfers the print to your label. Bottler Points: -Capable of producing 1,000 to 3,000 bottles per hour -12-head double phase rinsing station that rinses and blows out the bottle -12-head isobaric filling station with electropneumatic spouts for consistent fills -Uses a pre-evacuation pump to purge all oxygen -Single head rotating crown capping station that can use 26 mm and 29 mm crowns -Uses a fine water jet to create foam before the crown is applied -External bottle rinser after crowner turret -We currently have change-over parts for 3 bottle sizes (12 oz longnecks, 330 ml, and 750 ml) -Has 478 working hours -Has produced roughly 4,000 bbl of product (roughly 1.3 million bottles) -Comes with the unloading station Labeler Points: -Can label...
Krones Cold Glue Bottle Labeler Great condition, quality German manufacturing. Many spare parts included and we can assist with install and training. Asking price is open to discussion, call or email. For more specs and other contact info visit us here soundbrew.com/krones-robusta-labeler/
Used Side Grip Bottle Elevator for glass beverage bottles, used in a beverage packaging plant. Has seen little use. Infeed height: 56 inches Outfeed height: 132 inches 11 feet Adjustable conveyor width ranges: 3.5 to 11.5 inches Frame dimensions: 53 length x 38 width (inches) Power supply: 240-480 voltage / 3 phase / 60 hertz 7.5 amperage Overall dimensions: 112 length x 38 width x 132 height (inches)
Item Type: Tray Packer Manufacturer: Kayat Model: TP-50 Serial: 141-95 Year: 1995 Last Use: Soft Drink Dimensions: 25x6x6 Automatic medium and high speed tray former and packer for loose cans or 4–6 pack high cone cans into trays, Operator Free, Packs into corrugated trays, Soft Start Operation, 460 Volts, 60HZ, 3PH, Last running 12oz. soft drink cans in 24 pack loose and 4-6 pack high cones at 1000 Cans/minute, Last in Operation 2014, Nordson Glue Unit included
This labeller has been used to apply cold glue cut-and-stack labels to 341mL bottles (neck and front body, previously also a back body). It has ~5,000 hours of run time. It was decommissioned in Jan 2020 by a Krones technician. We have some video and more pictures that we can supply if requested. Please let me know if you're interested. PS: We also have a Krones Mecafill bottle filler for sale in another ad.