Storm Peak Brewing has 29 Halfs and 30 Sixtels of PKA kegs. Will take 500$ for the whole lot. All cleaned and pressure tested. Buyer arranges shipping but they're on pallets and ready to go. Located in Steamboat Springs, CO.
***PICTURES ARE NOT UPLOADING...EMAIL OR PM FOR PICTURES*** We are selling off the last of our 50L kegs as we transitioned to 1/2 bbls. We have 92 available. We are asking $55 per keg but are willing to work out a deal if you buy the lot. They are all in very good condition, and all have American Sankey Valves. They are embossed with "Wynwood Brewing" on them though but its a good opportunity to get some really good kegs on the cheap. Email Nik@Wynwoodbrewing.com for more info or pictures. Thanks for looking.
32 short 1/4bbl kegs Kegs were purchased used: (32) kegs purchased 2/23/18 Before I put these kegs into circulation I pulled the spears on each one and soaked spear components in PBW. I installed new C02 valves, circlips, and O-rings before reassembly. The kegs were then ran through a hot caustic cycle, hot acid cycle, and sanitation cycle. Once the keg were in circulation I ran hot acid cycles and sanitation cycles between fillings. All of the kegs have gone through an acid cycle and sanitation cycle and are currently being stored in the basement of our building. We are selling these kegs because we recently purchased new slim 1/4bbl kegs. Kegs are $40.00 a piece ($1,280 total) as that is what I paid for them. Buyer will be responsible for pick up and delivery. I can stage the kegs on two pallets for pick up. Lift gate required for...
1/6 and 1/2 BBL lightly used Franke kegs Near Miinneapolis/St Paul MN We have around 500 1/2B and 1/6B lightly used German made Franke kegs for sale. They are the highest quality kegs you can buy and are backed by a 30 year warranty. Most of the cheaper made kegs have warranties of a year or two. Drop-in Sanke Micromatic spears. The oldest ones were originally made in late 2012 and the newest in late 2014. They have been cleaned and refilled approximately 15 -24 times. Our kegging unit uses steam and caustic solution in the keg cleaning process so they are fresh and have no accumulated beerstone. We will help arrange for the most economical shipping but the cost of shipping is not included in the keg price. “Keg Logistics” is embossed on the upper chime and is the only embossing so legally converting to your brewery ID is...
Up to 30 Kegs/hr Capacity Easy push putton operation Automatic PLC control Adjustable wash timing and temperature Multiple keg volume memory Dual heated tanks w/ level floats Conductivity probes 304 Stainless steel construction Compressed air required Dimensions 47" x 53" x 75" Total Power 7.4kW Any buyer is responsible for rigging and transport of vessels.
I have 700 50L Black Das Plus Kegs (made by Schafer). $20/each, plus freight. They are not pretty, but they do work. The rest of our float is the smaller height 50L, so these don't work well in our brewery. These are stacked 24 per pallet, so I'd prefer to sell them in 24 keg increments.
4000 x 1/2 BBL kegs - Used American standard D Sankey all-stainless-steel, (de-branded). Rebuilt with new C02 valves & gaskets if needed. $62.45 ea. - 6000 x 1/4 BBL kegs - Used American standard D Sankey (tall) all-stainless-steel, (de-branded). Rebuilt with new C02 valves & gaskets if needed. $64.95 ea. - 3000 x 1/4 BBL kegs - Used American standard D Sankey (squat) all-stainless-steel, (de-branded). Rebuilt with new C02 valves & gaskets if needed. $34.95 ea. - 1000 x 1/6 BBL kegs - Used American standard D Sankey all-stainless-steel, (de-branded). Rebuilt with new C02 valves & gaskets if needed. $57.95 ea. - Can ship immediately. Shipping from Ontario, Canada. Tax-free for US customers. We handle all shipping arrangements & customs clearance. Pricing is in USD. Please send all inquiries to: firstname.lastname@example.org [U]All used kegs are repaired, pressure tested and in good working condition. Customers are responsible for cleaning to...
These are gently used 1/6 kegs (20L) North American Sankey "D" valves They are completely blank, and were never branded. Only stickers, which have been removed. USD $47 ea. ($65 ea. Canadian) For orders over 100 kegs USD $51 ea. ($70 ea. Canadian) For orders under 100 kegs LEASING NOW AVAILABLE! Ask about details.
American and European made. North American Sankey "D" valves. Contact email@example.com
Price reduced!!! 2 KHS Till Keg Boy C2 Keg Washer and Filler with Table PRICE REDUCED ( $42,500.00 )Hot
PRICE REDUCTION !!!We are selling 2 KHS Keg Boy C2 machines. The left side cleans and sanitizes and the right side purges and fills the kegs. They were set up next to each other with a table so 1 person can run them and 1 person can palletize. One machine is a 2003 and does not have a screen and the other is a 2007 machine which has a Panelview on it for viewing status of the machine. Both machines have run well for us. We upgraded to a KHS rotary machine. With both machines running and a good operator you can fill 50 kegs an hour. Both machines have Allen Bradly PLCs. KHS has been very good to get parts from when needed. The machines will come with the spare parts we have in house. They are both 480volts.
I have about 92 Stainless 5.16 gallon kegs for sale that we have phased out of our wine program. $70 ea for less than all, $60 for the whole lot. Also available are 60 - 18L kegs, ($45ea) lesser quality, plastic tops and bottoms.
We have a variety of used sanke kegs for sale...approx 70 sixtels ($45/ea), 20 halfs ($85/ea) and about 10 qtrs($60/ea). They are located in Wylie, TX. If shipping is needed, buyer is to arrange that.
Barrel racks for sale. Great condition. Fits standard 53 gallon whiskey barrels as well as wine barrels. Powder coated. Half racks $75. 12 available. Double barrel. Full Racks $85. 24 available. Double barrel. Buyer responsible for shipping costs.
160 1/4 bbl kegs available for sale. Asking $32 if you buy 8 (1 pallet), lower prices if you buy more. Located in Rhode Island, email firstname.lastname@example.org for more info and to make an offer.
Single-head Mad Keg Cleaner from shuttered brewery. Dimensions 32"wx24"dx36"h. On casters for easy relocation. Requires 120V, hot water input, nitrogen or CO2 supply, and drain. The number of wash and sanitize cycles can be set individually. Includes regulator for nitrogen or CO2 and coupler for Sankey kegs. Used successfully for over one year with no problems. Crating/palletizing and shipping are responsibility of the buyer. Keg washer is located in Euclid, OH.