Model: CWA-34 This unit came with a brite tank we bought from a group of guys building a mobile canning setup that never launched. They ran this unit a total of only about 10 hours since new. We plugged it in and ran it to make sure it works and it does. 350' Run Long Draw Draft Beer Glycol Chiller | 12 Gallon Capacity, 3/4 HP A twelve-gallon glycol beer chiller for sale that runs on 3/4 horsepower and can support up to a 350-ft-long cooling line from chiller to beer faucet. This glycol beer chiller is one of the most dependable glycol chiller systems available in the market today. It features a gear-driven pump, as well as a digital thermostat. Details and Features of This Glycol Beer Line Chiller Can deliver chilled beer for up to 350 feet from the cooler to the beer tap or tower (Remember to consider...
May 5, 2020 Hi Brew buddies, We are cleaning warehouse and have a off running job used 40 HP (has 40 10 HP compressors) we are looking to at discounted market rate as to make space. $12 K and sold as is. Unit comes with "est" 600 gallon poly with several ports, 5 HP recirc pump, and 7.5 HP supply pump. Unit is ETL listed and from what we know was running 100% satisfactory at time of removal before we stored it. Please email me at email@example.com for more info.
April 1, 2020 Afternoon Brew buddies, We have several slightly used .75 HP as well as 1 HP indoor rated chiller for sale. 208/230 volt 3 phase or 1 phase. Got in on trade / ran great on testing, cleaned up and ready for your brew cooling! Nice unit for a small brew pub or pilot system. Asking $1,400.00 to $3,000 each and with or without warranty dependent on sale price. (new they sell for around $4,500+ each). more info and photos at firstname.lastname@example.org
April 1, 2020 updated list Here’s a current list of systems we have in stock today, open to offers .25HP keg line chiller. Asking $550.00 115 volt 1 ph One FILTRN 1/2HP air-cooled indoor rated package chiller on wheels. 115 volt single phase power. Application temp range is 40F-70F. One Remcor 3/4HP air-cooled indoor rated package chiller on wheels. 230 volt single phase power. Application temp range is 28F-70F. One TEMTK 1 HP air-cooled indoor rated package chillers. 230 volt 1 phase power. Application temp range is 28F-70F. Two 1 HP air-cooled indoor rated package chillers. 230 volt 1 phase power. Application temp range is 28F-70F. One FILTRN 5HP water-cooled indoor rated package chiller. 460 volt 3 phase power. Application temp range is 40F-70F. One FILTRN 5HP water-cooled indoor rated package chiller. 460 volt 3 phase power. Application temp range is 40F-70F. ...
May 5, 2020 Hi Brew buddies, We have several cooling coils (slightly used), cleaned up, test and fully functional. They range from 5 ton to 40+ ton. Power requirement ranges from 115 volt to 208/230/480 3 phase. They can be used to cool walk in cooler, spot cooling or whole warehouse cooling. Price is based on unit. Please contact us at email@example.com for more info and to size your cooling load.
Fully functional electric vaporizer, 1,500 Pounds per hour vaporized CO2 @ 70°F, 460 volt 3-phase. Unit was in a "back-up" service for the past several years and works great. All plate circuits were recently test and passed no problem. 1" inlet /outlet. Includes inlet shut-off solenoid.
Glycol Chiller for Brewery. Copeland 1-1/4 TON Single Phase Chiller. Model RST80C1-PFV-901 Includes glycol tank with cart and casters. Dimensions are roughly 4' H x 4' W x 3' D. This chiller was used to service four 10 BBL fermenters, and two 10 BBL brite tanks. It did a great job and was working perfectly before removing it from the brewery. We just don't need one this size as our brewery is very small. BRAND: Copeland MODEL: RST80C1-PFV-901 Factory specs: Tons: 1-1/4; Volts: 208/230; Phase: 1; BtuH Capacity @ 45°F Evap.: 13,600; Suction Conn.: 1/2"; Discharge Conn.: 3/8"; Conn.: Terminal Block; Compressor: Reciprocating; Application: High Temperature; Refrigerant: R22. The pump and tank alone would cost over $10,000 new. This is a great price at Located in Longmont Colorado. Cash and carry only, or if you send a shipper to our location, we will help load it on their truck. The...
Stand alone refrigeration skid to make approx. 60 GPM of chilled water for wort cooling, includes: Bitzer R22 Compressor & Coil Grundfos Dual Centrifugal Transfer Pumps Falling Film Plate HXC's ( x 6) HDPE bulk storage tank hafner (Kalte +Kilmatechnik) controls * Have the wort cooler also
Alga SDI Air/Gas Mixing Station Power XP Explosion Proof, Model XPV 28-5 Twin Cylinder, Serial Numbers 0100252-1 & 0100252-2, Venturi Mixing Capacity = 14.0 MMBTU / HR, MAWP Vaporizer = 250 PSIG, Receiver = 50 PSIG, Vaporizer Model XP160S, 480 VAC, 48 AMPS, 40 KW, Class 1, Division 1 Group D, Enclosure. Unit was installed in 1999 but ran less than 5 hours for testing only, excellent condition
Practically new 2HP glycol chiller. Ran for about one week, too big for our brewery. Paid $6200. $5500 + freight to you. BC-2A (indoor model) specs: https://www.advantageengineering.com/breweryChiller/index.php
We picked up this 10-Ton process chiller made by Dimplex Thermal Systems SVI-10000-M in 2017, and ended up without convenient access to 460V 3-Phase power. It's part of their Koolant Koolers "S" line (https://www.dimplexthermal.com/products/standard-series/). We intended to run it off a 460v transformer, but got a deal on a more convenient option, so this one has just been taking up space in our production facility. It was running when taken out of service in 2017, but we've never hooked it up. It's an indoor model. $7,500 and it's yours. Buyer pays freight.
5 ton penguin chiller, only six months old and kept indoors since purchased new from Penguin in Fall 2019. The chiller works like new and comes with a large glycol reservoir. We're getting rid of it because we're moving to contract packaging, and it will be available late April.
Glycol Chiller System; 9 ton. Great workhorse for our Winery, we simply needed a larger system to support expanding operations. Disconnected March 2, 2020. 1 mechanical issue: may need compressor work, leaks in vacuum.
We purchased some temperature control equipment a while ago and ended up upgrading before even having a chance to install it. Much of this is still in its original packaging and has never been used, what has been used was only checked once before putting it back in it's packaging. The lot contains a little more than $2,000 worth of equipment and would be great for setting up a temperature monitoring and control system for individual vessels. Currently listed on eBay, see link below: https://www.ebay.com/itm/164185686735
Great running water heater / low pressure steam boiler, was in use indoors at a California Winery in a waste water treatment application that operated only 6 months out of the year. Unit was removed from service and stored indoors in 2008. Comes with many ancillary pieces (for water service), air separator, circulation pump, chemical pot feeder, water make up manifold along with the complete natural gas inlet train. Cost = $ 7,000.00 or best offer