Grain Storage and Handling Equipment

Reset - Viewing: Category Grain Storage and Handling Equipment

New Product Ad posted 11 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks

A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case.  Offered in 3", 4", and 8".

New Product Ad posted 11 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks

A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case. Offered in 3", 4", and 8".

New Product Ad posted 11 months ago in Grain Storage and Handling Equipment by Marks Design and Metalworks

A slide gate for manually releasing or stopping the flow of grist into the mash tun from a grist case. Offered in 3″, 4″, and 8″.

Used Product Ad posted 2 months ago in Grain Storage and Handling Equipment by ABM Equipment

Pictures are too big for the site, go here to scroll the gallery (arrows are hard to see). Briefly-used grist case from the distilling industry with air flow-assist configuration. Free of defects with Ø11″ inlet, Ø6″ outlet, and Ø4″ dust port. Click here to view full drawings and dimensions. Go here for general information about our grist cases. Volume 450 Cubic Feet Capacities Liquid – 3,172 Gal | Grain – 11,436 lbs. Materials 304 Stainless with 2B outer finish and sanitary interior finish Dimensions 132 9/16″ H, 110 1/4″ W Weight 1,876 lbs. Made In USA Price $18,000

New Product Ad posted 2 months ago in Grain Storage and Handling Equipment by ABM Equipment

The ABM Equipment Scale Package is the industry's original and most effective solution for weighing in-feeds from silos, bulk bags, and specialty hoppers in 100-lb. increments. This saves you from having to weigh each in-feed separately, and greatly improves accuracy by averaging all actual weights and correcting them with the final batch. It helps monitor inventory, account for grain in-lines, and accommodate virtually infinite recipes for push-to-start operation. It’s highly reliable, accurate, and uses C++ coding (so it will always be supported.) And as always, it’s built to order and includes turn-key integration & calibration. Standard Specs 3″ x 3″ Powder-Coated Carbon Steel Frame Mounting For Auger/Chain Disk, Junction Box, Dust Collection (Or Sock) Remote Relay Output Box Open Design For Access To Any Equipment Stainless Discharge Preassembly with 3 S-Type Load Cells Programmable Controller With Virtually Infinite Input & Recipe Storage Options Variable Footprint/Height Custom Colors/Paint Stainless Steel Construction...

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Pugs13

Barely Used Portland Kettle Works Maltmaster Mill - 7bbl - 15bbl Adjust the crush of your grain on the fly. LIKE NEW & Small footprint. Auger motor is a 3 phase - 3/4hp unit. The augur comes with PVC piping that is set up for roughly 15ft at 45 degrees from mill and then runs straight for an additional 30ft to our mash tun, so overall the auger is roughly 45ft of line.  Again, all this comes with the purchase.  Brand new this was $17,000.  I am looking to get $14,200 OBO. Looking to downsize and needs to go!  Buyer must line up shipper and pay all shipping costs.

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by William Sada

Alpha Grain Mill $4900 Alpha 2 Roller Grist Mill Dust Tight 6x6 Rollers 3000lb/Hr

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Raquette_River

For Sale: Monster grain mill, complete with motor. $350.00. Can be seen at Raquette River Brewing in Tupper Lake.  Cheers!

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Dustin Teague

Custom Fabricated Mill Roller Grinder for 1-5 BBL System. Hopper is large enough to hold (1)-55 gal. sack of grain. Wood Cabinet below for dust control and storage of milled grain. Can be attached to auger if needed. 1 HP motor. 110v. Comes with 3 sets of back up rollers so you can always have fresh re-knurled rollers to swap out. Rollers were fabricated by https://www.crankandstein.net/ Don Obenauer at crankandstein has been great for the past 7 years keeping our rollers sharp.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Hansen

Engl 2 roller mill in good condition. This will be available mid-summer 2024. Local pickup, or buyer arranges shipping.

New Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Union Jack Tools

These durable and lightweight containers are excellent for storing/transport spent grains for your brewery. Most importantly, they meet the Food Safety Modernization Act (FSMA) requirements for spent grain removal (21 CFR 117.95). They are made of USDA/FDA-compliant materials and color-coded (available in Blue, Yellow, Gray and White). They can be easily cleaned or pressure washed before reuse to ensure food safety. The optional lids will keep pests away, tamp down smells, and still allow the bins to be stacked for storage/transport. Unlike standard trash bins, these containers won't be confused for trash. Runners allow for easy transport via forklift or pallet jack which prevents injury to your staff. They are so lightweight you can move an empty container by hand! The one-piece, high-density polyethylene (HDPE) construction is durable yet flexible - it won't shatter if you puncture with the forklift. Features / Specifications FSMA-compliant per GMP Guidelines for Spent Grain Removal...

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Bobby Myers

Brand new Grist case manufactured by SK Škrlj in Slovenia for 7-10BBL brewhouse. Was included in our brewhouse purchase but we do not have the vertical space for it. Still wrapped and palletized and ready to ship.   Description from Manufacturer: Nominal volume in l: 360 Nominal volume [bbl]: 3 Material: EN 1.4301/ASTM304 External visible surface is brushed with SCOTCH BRITE material. Final roughness isn't defined. Brushing leads to a uniform and aesthetic surface quality. Internal product contact surface is a smooth, bright, and reflective 2R (BA) surface without further treatment. Stainless steel is protected against scratches with protective film.

To top