Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Michael Killgore
Free was used for malted barley for brewing beer, has to be taken apart to remove from building. Holds 48000 lbs of malt. You can take the auger too. 1. ALL of the equipment to move this tank without damaging the floor of a warehouse, lift onto a trailer, and haul the tank. 3. Experience in rigging. 4. Proof of business’s liability insurance. Free but you must remove from the warehouse and load it yourself with your own equipment.
Used Product Ad posted 1 week ago in Grain Storage and Handling Equipment by Jackwk5
We are selling a mix of new and used milling and grain handling items. New: 6,000 lb capacity Grist Case 4 Load cells for grist case Used Motor and drive for 6"(believe this is actually Din 150) with pipes, chain and disk. Motor and drive for 3"(believe this is actually DIn 85) with pipes and disk Kunzel 4 roller mill, about 1200 kg/hr max speed 2 grain hoppers with motor and auger to feed chain and disk Contact Jack @ jacksabby.com for more information.
Used Product Ad posted 6 days ago in Grain Storage and Handling Equipment by DESTIHL BREWERY
For Sale: 12" Pneumatic Knife Gate Valve, rated for 150 psi, crated, in like-new condition. Terms: $350.00. Already crated and available for immediate shipment. Price is as-is, FOB Normal, IL (i.e., Buyer responsible for freight/shipping). 100% non-refundable down payment via bank wire to secure purchase and prior to loading/shipping. Viewing by appointment only. To schedule an appointment to view or to obtain more information or to otherwise submit an offer, please email only serious inquiries to office@destihl.com (replies to this post on-line will not be routinely checked).
Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Dustin Teague
Custom Fabricated Mill Roller Grinder for 1-5 BBL System. Hopper is large enough to hold (1)-55 gal. sack of grain. Wood Cabinet below for dust control and storage of milled grain. Can be attached to auger if needed. 1 HP motor. 110v. Comes with 3 sets of back up rollers so you can always have fresh re-knurled rollers to swap out. Rollers were fabricated by https://www.crankandstein.net/ Don Obenauer at crankandstein has been great for the past 7 years keeping our rollers sharp.
Used Product Ad posted 2 days ago in Grain Storage and Handling Equipment by Robert Ryan
NEW (Unused) Suspended Grist Case Designed for a 5 BBL system Manufactured by YoLong Brewtech Stainless steel Drawings are available Compare at over $3,000 USD for NEW Price and Shipping Info $990 USD Payment in equivalent Canadian currency can be negotiated INCO terms: EXWORKS (Windsor, Ontario, Canada) Shipping and handling not included
Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Bell
Sized for 7 BBL Brewhouse 7 BBL Grist Case fabricated by American Beer Equipment. Designed for floor placement with mill mounted on top and auger mount underneath. No issues with this piece of equipment; in great condition.
Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Josph Hallock
Flex-Flo Model 500 grain auger. Approximately 60 feet of coil, drive motor and boot/ transfer plate for hopper. Operates on a 20 amp 220V circuit. Uses Flex Flo 500 PVC pipe which can be ordered from Flex Flo to fit your layout. The bearing and end unit have been replaced.
Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Joshua Johnson
Used Flex Auger without PVC pipe, Will need some fixed wiring. USED CONDITION
Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Jason Bell
Sized for 15 BBL Brewhouse 15 BBL Grist Case fabricated by Alpha Brewing Ops. Designed for floor placement with mill mounted on top and auger mounted underneath. Great condition; no issues.
Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Daniel Diaz
Malt Mill model XW-G3. 500 kg/hr capacity, 1.5 kw motor, 208v-240v 3 phase power. Brand new. Buyer pays shipping. $2500.00 Contact Travis Smith via email to Travis@twelvetalons.com with the subject line “Grain Mill”.
Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by irishod89
FeedPro Grain Weighing Systems: 3 available, asking $2,500 each Used to weigh grain from the bulk silo and bag stand/tote assembly. They have an internal auger and weigh scale. They control the flow of grain accurately and handle a flow rate of up to 7,200#’s/hour. Purchased new in 2014. Approximately 37" x 13" x 48" Also available is the main computer box that controlled all three although you don't necessarily need this incorporated, they can be run on their own. It was used to control and relay signals to the mill, etc. Additional photos available upon request.
Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by chad phillips
1200L grist hopper with 30° exit for auger. (Auger is available also for additional cost)