Cans

Reset - Viewing: Used Product Ads, Category Cans

Used Product Ad posted 2 weeks ago in Canning Equipment by Oktober Can Seamers

OKTOBER DESIGN TRADE-UP PROGRAM LOOKING TO REFRESH YOUR BENCHTOP CANNING SYSTEM? We are happy to credit your used Oktober seamer, in any condition, towards the purchase of a new one! Trade in your SL1, MK-series, or Model 7 towards a new Model 7 or Model 8. Email at info@oktoberdesign.com or call us at 231-750-1998 to get started.

Used Product Ad posted 12 hours ago in Canning Equipment by FRAN TOVES

Ska depal and conveyors. All motors up and conveyors upgraded to handle speed of WG 10

Used Product Ad posted 12 hours ago in Canning Equipment by FRAN TOVES

In excellent condition. It’s been offline for a couple of years.

Used Product Ad posted 2 days ago in Canning Equipment by Joshua Rechek

Barely used and well maintained Inline Paradigm 700-VS labeler.  Custom U-bend style conveyor.  Servo drive label wrap.  Trunion can spacing add-on included.  We reliably ran this machine at 100 cans/min.  $17,000 asking price.  Additional single lane infeed and outfeed conveyors also available for $1,500 asking price.

Used Product Ad posted 2 days ago in Canning Equipment by Donnie Eldridge

We have a Gosling Canning line from Wild Goose. This is the perfect canning line for a small space. 8 cans per minute is no problem for this tabletop canning line. When you are done move it to the corner out of the way. This Gosling comes with extra parts and a manual. Happy to help with the set up.

Used Product Ad posted 3 days ago in Canning Equipment by Joel McGinnis

Well maintained like new Wild Goose Canning line. 4-Head filler is turn key ready. Up to 40 cans per minute. Will fill both 12oz and 16oz size 202 cans. The chuck is setup to use Crown Superends. Comes with loading chute and stand, sanitizing twist rinse, six Cornelius kegs for sanitizing and CIP. Buyer responsible for shipping or pickup in Lake In The Hills, IL.

Used Product Ad posted 4 days ago in Canning Equipment by Rob Armgardt

Cask filler website: https://www.cask.com/canning-systems/macs-micro-automated-canning-system-2/ Filling machine also comes with Modular Shaker table, water twist rinse cages (250 mL slim, 200 mL slim, 12 oz sleek, 12 oz standard, 16 oz standard), a section of conveyor, seamer parts for different can heights and diameters, and lid dispensers for 202 and 200 lids. Seamer needs new chuck and seaming rolls. When looking at the machine infeed, HMI touchscreen is on the left side. System was run mostly on 250 mL slim cans.  We successfully ran it at 24 cpm on a consistent basis with RTD products.

Used Product Ad posted 4 days ago in Canning Equipment by Rob Armgardt

Package your own brews at a rate of up to 60 cases per hour with this fast & push button simple MicroCanner 202 canning machine! 26 CPM (cans per minute) Runs standard cans 8 oz, 12 oz & 16 oz 110 volt – plugs into standard electric outlet CO2 pre-purge before fill & C02 purge after filling before cap application Push button simple operation In Feed Auto Rinse Included

Used Product Ad posted 3 days ago in Canning Equipment by Tim Turrentine

This is a Genie Lift GL 8 Straddle Base manual light lift, modified to fit a full pallet of empty cans. 8" have been added to the width of the base--4" each side. 20" extensions have been added to the length of the forks. Base width is adjustable from (inside dimension) 34" to 44 3/4". Lifting forks are 42 1/2" long, 21" outside dimension, 13 3/4" outside, 2" thick. Minimum height is 2", maximum is 89". The backplate may be removed for lifting flush to a ceiling. Maximum lift load is 400 lbs. We used this as part of a manual depalletizer for our canning line. Operator's manual is included.

Used Product Ad posted 3 days ago in Canning Equipment by Steve Mileusnic

Set up to run 12 or 16 oz. cans. Low profile system measures 5.5’ tall x 7’ long x 30” deep (fits through doorways) and can be rolled away for storage. Oversize casters and leveling pads for easy transport and stable set up. Comes with can rinse and blow-off tunnel - Online maintenance manual - Online set-up guide / troubleshooting videos.  This line is also expandable by Microcanner to run double capacity. Runs at 30 cans per minute as is, 60 cans per minute after upgrade. (Contact Microcanner for upgrade cost and details.)

Used Product Ad posted 3 days ago in Canning Equipment by Matt Morrow

We have a CODI CCL-45 Canner (3 Head) for sale with a rinse / collection table set up for a straight shot or 90 degree turn (not shown in pictures but photo available) depending on space.  Max speed run with beer was around 30 CPM but averaged around 24 CPM.  Near zero loss with the counter pressure filling and can easily can off of kegs with near zero loss.  From someone who has worked with Meheens, Krones, Wild Goose, and Cask canners and bottlers the CODI canning machine is by far the best I have ever worked with, over engineered in the best possible ways.   CO2 Pre-Purge CO2 Tunnel Foam Jetter (Seltzers / Ciders) B-64 Lid Chuck Cleaning Chucks for 12 oz and 16 oz Soft Parts kit Power cable whip with separate 30 amp plug (set up to run off 20 amp) In use since December 2022 approximately 110,000...

Used Product Ad posted 5 days ago in Canning Equipment by Tim Cachia

Three head semi-automated manual canning line.  Set up for 16 oz cans with dies for both Ball and Crown cans.  Comfortably produces 12 cans per minute.  Been well maintained and works very reliably.  Includes a manual ink jet printer date coder. Happy to answer any questions you may have.

To top