Cans

Reset - Viewing: Used Product Ads, Category Cans

Used Product Ad posted 3 weeks ago in Canning Equipment by Oktober Can Seamers

OKTOBER DESIGN TRADE-UP PROGRAM LOOKING TO REFRESH YOUR BENCHTOP CANNING SYSTEM? We are happy to credit your used Oktober seamer, in any condition, towards the purchase of a new one! Trade in your SL1, MK-series, or Model 7 towards a new Model 7 or Model 8. Email at info@oktoberdesign.com or call us at 231-750-1998 to get started.

Used Product Ad posted 6 hours ago in Canning Equipment by Dale Heinlein

Very low Miles on the seamer count DATES are wrong on pic purchased 2019 ABE Craft can 35 – canning line w/ manual rinse ABE Label Max 85 Pressure Sensitive Can Labeler Video Jet Deluxe InkJet Date Coder with Product Spacer VJ122 American Beer Company – Manual Can Twist Pre-Rinser – Deluxe Ink Jet Date Coder – Digital Brite Tank Monitor – CraftCan35 Complete Servo Canning System – The LabelMax85 Pressure Sensitive Can Labeler 1 – Pack Off Table Air compressor – Quincy QT-54 Splash Lubricated Reciprocating Air Compressor, 5 HP, 230 Volt, 1 Phase, 60-Gallon Vertical, Model# 2V41C60VC

Used Product Ad posted 8 hours ago in Canning Equipment by Joe Groenhof

This is a used xpressfill 4500c and Dixie Canner. They operate good but need a little cleaning. They have been in storage for 4 months. The seamer switch, and roller are a little sticky just from sitting. If the switch needs to be replaced it's $100. The rollers just need some cleaning. I did check the specs on the seam and it's still in proper tolerances.   On the filler I never use the pressure release knob because the can release does the same thing. I noticed those pressure release knob don't work. I never used them, but if you do, just guessing they cost $200 for both of them and take 15minute to replace. Let me know if you have any questions. Xpressfill 4500c- $2350 dixie canner- $2600 Or both for $4600 Buyer arranges shipping.  

Used Product Ad posted 22 hours ago in Canning Equipment by Adam Shay

Hermis Pasteurizer, year 2017, S/N 17130.  Available in August.  Complete list of available equipment can be found at www.carolinaprocessequipment.com.

Used Product Ad posted 22 hours ago in Canning Equipment by Adam Shay

Meyer Case Packer.  Available date not yet determined.  Complete list of available equipment can be found on www.carolinaprocessequipment.com .

Used Product Ad posted 24 hours ago in Canning Equipment by James Waltz

Used for 3 years. $1,500 Suitable for carbonated beverages such as beer and kombucha Purges with CO2 prior to filling Adjustable shelf to accommodate cans up to 11.5" tall and 4" in diameter The XF2200 can filler is designed for the Artisan Craft Person looking to fill cans with carbonated beverages in a simple and affordable manner. The filler can accommodate most cans sizes with its adjustable shelf, allowing great flexibility, and is suitable for carbonated beverages such as beer and kombucha. The XF2200 is based on the XpressFill Level Filler with modified valves and flow path diameters resulting in a much better flow of product with less foaming and better CO2 retention. The filler will accommodate cans up to 4 inches in diameter and up to 11.5 inches tall. Features & Specifications: 360 cans per hour capacity (12 oz) All materials in the beverage flow path are FDA certified...

Used Product Ad posted 1 day ago in Canning Equipment by PrismNic

Cask MCS V1 micro-canning system. (10 CPM) Perfect intro machine for those doing smaller batches or just getting into cans. We used it for 2 years and just upgraded to bigger machine. Currently attached to 5ft stainless table but table has no legs (threw them away as they were not stainless and all rusted). Can sell with or without the table. Currently set up for 355mL sleek cans but can be modified for nearly any can size.  

Used Product Ad posted 1 day ago in Canning Equipment by Andy Tveekrem

Lightly used ICHA 60 for 6 pack handles (Roberts PolyPro only, won't run PakTechs). We ran 12 and 16 oz cans. Change parts can be ordered for 4 packs or sleek cans from Roberts. Cans index in and discharge at a 90 degree angle. Will run at speeds up to 60 cpm or 10 cycles per minute.  Please reach out for additional photos or information.

Used Product Ad posted 1 day ago in Canning Equipment by Jeff Tobin

Like new four head canning line, half-height depal, twist rinse. Set up for 202 lids (optional superends tooling available). Equipped with pressure and temp on beer manifold. Modified beer manifold to eliminate foam (see photos) and CO2 blanked for DO reduction. Also selling label applicator and Orbispere DO meter separately, but will take offers on bundle. This line has been well maintained, shows very little wear, and with DO attachment provides very low DO pickup during canning.

Used Product Ad posted 1 day ago in Canning Equipment by David Bronstein

This line has been a workhorse. We purchased it used in 2017 and have used it reliably since, running 30+cans per minute/300+cases per day 5 days per week. Regular maintenance and a few upgrades have kept it consistent, nice seams, good fill levels, DOs in the 30-60ppb range. Decommissioned November 2023. Depal and Labeler included. Many spare parts including backup PLC. Price is negotiable. Rigging included! I can also include a line that was used to fill 1-gallon water bottles. It has many of the same parts and can be used for spare parts including a labeler for a great price! Contact with any questions. Make an offer!  

Used Product Ad posted 1 day ago in Canning Equipment by Matt Webster

Xpressfill 4500c two head counter pressure can filler and Oktoberfest seamer.  Xpressfill is less than 2 years old!  We used it to prove our canning business model and recently upgraded. New the pair would cost $8000.  $5400 for both.  Buyer pays shipping from 34994.

Used Product Ad posted 2 days ago in Canning Equipment by Stefan Popescu

https://microcanner.com/Flex.html Pricing - https://microcanner.com/files/MicrocannerPricingListQ4-compressed.pdf Both items new are - 60K   3 head filler micro canning system Comes with on-feet conveyer belt 30 cans per minute - MC-FLEX & CRAFT INFEED   Great machine - we are just upgrading to a faster machine to keep up with demand.

To top