Bottling Equipment

Reset - Viewing: Used Product Ads, Category Bottling Equipment

Used Product Ad posted 7 days ago in Bottling Equipment by Kevin Mashayekan

ZoneSun Semi-automatic labeling machine for round bottles comes with hot-print expiration date stamper and transparent label sensor fully adjustable for a variety for label lengths and heights and bottle widths and heights $900

Used Product Ad posted 7 days ago in Bottling Equipment by Kevin Mashayekan

ZoneSun semi-automatic capping machine for plastic continuous-thread caps adjustable height and speed, comes with a variety of chucks for any diameter cap 20-40 caps per minute $220

Used Product Ad posted 4 weeks ago in Bottling Equipment by Chris Schofield

2 head bottling machine perfect for a smaller operation looking to improve fill speed and quality. Configured to fill Berlin Packaging BN050 500ml bottles with 26mm crown caps but can be configured for other sizes. Fill speeds of 8-10 bpm depending on product This machine was used twice during the training runs with the Meheen technicians and once during production. The brewery had to go in a different direction and it's been in storage ever since.    

Used Product Ad posted 5 days ago in Bottling Equipment by Red Rover

As new equipment purchased for project that didn't happen. 1. Automatic Inline Bottle Capping Machine Model Trucap.X-Vert- 6 spindle Tightener Features: Heavy duty 304 stainless steel welded C frame for easy mounting over existing conveyors. Heavy duty linear carriage system for height adjustability All shafts and threaded rods manufactured in 304 stainless steel Heavy duty casters standard No change of parts needed for a wide range of containers Front covers with safety interlock switches standard Top driven to insure no product spillage into drive assembly Adjustable height to accommodate containers from 1 inch to 14 inches tall (Optional power height adjustment) Capping discs features: 6 spindle configurations, single gear box driven Independent spring loaded bottle capping discs for better torque and misalignment forgiveness. Torque is able to be adjusted while the machine is running (pneumatic clutch) Clutches located away from capping discs to avoid corrosion Heavy duty gear driven...

Used Product Ad posted 2 weeks ago in Bottling Equipment by Alex Unger

PRICE REDUCED - For sale is a used GAI 3031FM-BIER-001 Monoblock automated bottling machine that was built and purchased new in 2014.   $45,000 OBO Electrical: 220V / 3 phase/ 60Hz 12 head rotary rinser 12 head rotary counter-pressure filler Single station crowner Includes mass flow to single-file infeed conveyor External bottle rinser on outfeed conveyor Set up for 12oz longneck bottles, does not include changeover parts (available from Prospero Equipment, GAI's USA rep) Volumetric throughput: 1,200 L/hr (317 gal/hr or 10.2 bbl/hr) (Manufacturer Spec) Speed: 600-3,000 bottles per hour (Manufacturer Spec), we ran 12oz bottles at 50 bottles/min consistently Schneider Electric PLC and HMI Stainless steel construction Safety guarding in accordance with CE standards

Used Product Ad posted 3 weeks ago in Bottling Equipment by Chris Mitus

MFR: Cleveland Equipment & Machinery Model # CFL200 Machine tooling is set up for 50 ml airplane bottles, but can be re-tooled for varying sized bottles up to 240 ml. LR1110 Labeler FC1055 Capper FG-1000 Gear Pump 2 extra pumps included (for varying viscosity liquids):  Pneumatic Pump (good for lower viscosity liquids) MFR: Vevor, Model # G1WY Peristaltic Pump (good for high viscosity liquids) MFR: Moonshan, no model #   PRICE $30,000

Used Product Ad posted 4 weeks ago in Bottling Equipment by Todd Bellomy

A great workhorse of a bottling line that has been very well maintained. Easy to fix, maintain, modify, etc. and would be perfect for your non-carbonated needs. Bottles can be sourced from China, 7oz (207ml), twist-off beer crown without modification. Built for this BOTTLE Most of line is 3 phase / 208 - the labeller is single phase 120 This is a full line: > pack on and off tables > washer >12 head filler (non-carbonated) > 6 head capper (beer crown) > in-line labeller If you are a packaging line pro, I'm sure this line could be modified for other bottle sizes. Serious inquiries only please.

Used Product Ad posted 1 day ago in Bottling Equipment by Cullen Dwyer

This rinser is configured to convey bottles from a height of approximately 13 feet, and out-feed in the opposite direction at a height of 4 feet.  It grips bottles gently from the side with rubber chain links, inverts them for rinsing, allows drainage to a catch-pan, and turns them upright again.  In-feed section includes idler cog and frame for 4"-wide conveyor chain, as well as "slowerator" side-belts to ensure proper spacing of bottles.  Vertical section allows opportunity to date-code bottoms of dry bottles.  Easily adjusts for various bottle widths with the turn of a single wheel.  Overall dimensions: 15'L x 34"W x 15'H. This is an older machine that was recently decommissioned, and has operated trouble-free for many years.

Used Product Ad posted 6 days ago in Bottling Equipment by Cricket Carroll

Selling a *very lightly* used semi-automatic bench capper. The brewery that I work at has moved away from bottling beer to canning and no longer needs this very well-kept capper. --Semi-automatic machine in stainless steel --Pneumatic capper with 2 interchangeable heads for the closure of crown caps Ø 26 mm or 29 mm (I'm not sure if we have the 29mm head for this capper still but please ask if interested) --Push button operation --Manual crown caps distribution

Used Product Ad posted 3 weeks ago in Bottling Equipment by Jamie Garrison

Purchased in January 2020 from Winemaker's Depot.  Used only a couple times. Like New. Been in dry storage since March 2020. We switched our packaging to cans and no longer need this machine.

Used Product Ad posted 1 day ago in Bottling Equipment by Cullen Dwyer

Complete line, currently configured to form mother cartons for 12oz bottle 6-packs.  Included two Pearson 6-pack erectors, Pearson 202 case-former, and multi-packer to stuff the 6-packs into the case.  Also includes driven conveyors: straight chain from 6-pack erectors to multi-packer, 90-degree bend chain from case-former to multi-packer, straight belt from multi-packer (driven accumulation) and 90-degree out-feed belt.  Also includes idle out-feed idle rollers with 90-degree bend.  Case former is missing hot glue pot and heated glue hose. Overall dimensions of current configuration are approximately 42' x 23'.  The line was recently decommissioned.  Priced "to go" as we urgently need to free up this space.

Used Product Ad posted 3 weeks ago in Bottling Equipment by Chris Weed

Excellent shape and slightly used 6-spout gravity filler. A staple tool to help streamline your bottling needs. It is easy to use, clean, and is all stainless steel. The bottle fill levels are adjustable making it nice when shifting to other products. 6-Spout Wheel Base ~1100 x 410 x 1530 mm Reservior Capacity ~ 16.4 gallons Bottling Speed (750ml) ~12 BPM Sold as-is

To top