Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (9401 views)
The RVN is a centrifugal pump fitted with a helicoidal impeller. The RVN is the perfect wine pump, but it can also find its use in breweries, distilleries, and other craft food applications. This pump is ideal for pumping liquids with semi-solids, specifically, mash and must. The RVN 100 has 4" tri-clamp connections and can be paired with either a 10 or 15 HP stainless steel washdown motor. RVN is a range of close-coupled centrifugal pumps, characterized by compact design, high efficiency (>70%) and low energy consumption. It is made of a pump casing with drain port, helicoidal impeller, mechanical seal, lantern and shaft, connected to the motor shaft by mechanical compression. Thanks to the helicoidal shape of the impeller, the flow is optimized to avoid the obstruction of the pump, allowing solid particles to pass through without being damaged. The RVN centrifugal pump is provided with an internal single mechanical seal. As standard, the stationary and the rotary...
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (10735 views)
The CPE C+328MD Portable Pump is ideal for large production breweries and wineries with models up to 50 HP and flow capacity up to near 700 GPM. The CPE C+328MD Portable Pump belongs to the C+series centrifugal pump family. This family of pumps are based on the C-Series, but includes both a collar that clamps down on the drive shaft over the full 360 degrees removing the minor wobble that can occur from set screwed shafts and two specialized gaskets to seal the shaft while still allowing a CIP procedure to clean behind the impeller. This model provides a 3 inch inlet, 2 inch outlet, and an 8 inch impeller, allowing it to move high volumes of fluid at lower NPSH. It is built with a stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by spillage. These pumps are designed specifically for the tough...
Catalog Ad Posted 7 months ago in New Equipment - Misc. by CPE Systems (5766 views)
The CPE C328MD Portable Pump is ideal for large production breweries and wineries with models up to 50 HP and flow capacity up to almost 700 GPM. The CPE C328MD Portable Pump belongs to the C+series centrifugal pump family. This is a member of the C-Series family of pumps, permitting component intercompatibility with other C-Series pumps. This model has a 3 inch inlet, 2 inch outlet, and an 8 inch impeller, allowing it to move high volumes of fluid at lower NPSH. It is built with a stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by spillage. These pumps are designed specifically for the tough conditions found in food and beverage production. The carts are custom designed and built in Canada completely of stainless steel with non-marring heavy duty wheels. The pump head and motor are stainless steel. The C328 Portable Assembly will give...
Catalog Ad Posted 7 months ago in New Equipment - Misc. by CPE Systems (7527 views)
The CPE C+318MD Portable Pump is ideal for large production breweries and wineries with models up to 40 HP and flow capacity up to 500 GPM. The CPE C+318MD Portable Pump belongs to the C+series centrifugal pump family. This family of pumps are based on the C-Series, but include a number of upgrades including both a collar that clamps down on the drive shaft over the full 360 degrees removing the minor wobble that can occur from set screwed shafts and two specialized gaskets to seal the shaft while still allowing a CIP procedure to clean behind the impeller. This model provides a 3 inch inlet, 1 1/2 inch outlet, and an 8 inch impeller, making it a very effective pump for scenarios in which a lower NPSH is desirable. It is built with a stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by...
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (9536 views)
The CPE C318MD Portable Pump is ideal for large production breweries and wineries with models up to 40 HP and flow capacity up to 500 GPM. The CPE C318MD Portable Pump belongs to the C-series centrifugal pump family, meaning its parts are interchangeable with most C-Series pumps. This is a C218MD pump with an enlarged inlet for higher volumes and reduced NPSH requirements. It has a 3 inch inlet, 1 1/2 inch outlet, and an 8 inch impeller, making it a very great pump for large volume fluid processing. It is built with a stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by spillage. These pumps are workhorses that will give you years of excellent service. These pumps are designed specifically for the tough conditions found in food and beverage production. The carts are custom designed and built in Canada completely of stainless steel...
Catalog Ad Posted 7 months ago in New Equipment - Misc. by CPE Systems (9837 views)
The MH-20 Hop Induction System (HIS) greatly increases the ease and safety of the dry hopping process. Attached to select centrifugal or shear pumps, the MH-20 HIS hygienically suctions hops into your beer with minimal oxygen introduction. This completely eliminates the need for scissor lifts or shaky ladders, decreasing workload and greatly increasing safety. With the MH-20 HIS just load your hops, start your pump, turn the valve, and within minutes your hops are in the tank.
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (9454 views)
The All-Pur FDA-Series AODD pump is designed for fluid transfer in the food and beverage industries. Like all All-Flo pumps, this pump is built to last with an air mechanism that features the fewest moving parts of any pump on the market. This pump also has a simple streamlined bolted body design with minimal moving wet end parts, which allows for easy maintenance and repairs. This is a highly efficient metal FDA-approved pump that will give you years of reliable service. SPECIFICATIONS Tri-clamp connections Fluid Connection Sizes F100: 1" Connnection F150: 1 1/2" Connection F200: 2" Connection Air Inlet Connection Sizes F100: 1/2" FNPT Connnection F150: 3/4" FNPT Connection F200: 3/4" FNPT Connection Fluid End Material: polished and passivated stainless steel Air End Construction Material: F100: Aluminum, PTFE Coated Aluminum F150 & F200: Aluminum, PTFE Coated Aluminum, Stainless Steel Elastomers Available PTFE Santoprene Hytrel Maximum Lift: F100: 17 ft- H2O Dry, 30 ft-H2O Wet F150: 22 ft- H2O Dry, 31 ft-H2O Wet F200: 24.4 ft- H2O Dry, 31.7 ft- H2O Wet Maximum Solids: 1/4" Maximum Pressure: 120...
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (15105 views)
THE CPE C114 PORTABLE PUMP IS THE MOST POPULAR PUMP FOR BREWERIES. The CPE C114 Portable Pump is perfect for systems up to 30 barrels (depending on the application). These are the most durable pumps on the market - and every brewer will tell you that a reliable pump is a must-have for production to run smoothly. The whole process relies on a pump that will transfer product from tank to tank without hassle. The C-series centrifugal pumps are the most common pump used in Microbreweries and Craft Breweries. These pumps will give you years of excellent service and when needed replacement parts are interchangeable with most major brands of sanitary C-series pumps. Our pumps come with stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by spillage. Our Portable Pump Systems are designed specifically for the tough conditions found in food and beverage production. Our carts...
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (14801 views)
THE CPE C216MD PORTABLE PUMP IS IDEAL FOR BREWERIES PUMPING BATCHES OVER 30 BARRELS. The CPE C216MD Portable Pump is part of the C-series centrifugal pump family. These are the most common pumps used in Microbreweries and Craft Breweries in North America, and in food and beverage production in general. This model is a workhorse pump that will give you years of excellent service and is built with a stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by spillage. These are the most durable pumps on the market! They are designed specifically for the tough conditions found in food and beverage production. The carts are custom designed and built in Canada completely of stainless steel with non-marring heavy duty wheels. The C216 model is a workhorse pump that will give you years of excellent service and when needed replacement parts are interchangeable with most major brands...
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (13468 views)
The RVN is a centrifugal pump fitted with a helicoidal impeller. The RVN is the perfect wine pump, but it can also find its use in breweries, distilleries, and other craft food applications. This pump is ideal for pumping liquids with semi-solids, specifically, mash, and must. The RVN 65 has 2 1/2" tri-clamp connections and features a 1 1/2 HP stainless steel washdown motor. RVN is a range of close-coupled centrifugal pumps, characterized by compact design, high efficiency (>70%) and low energy consumption. It is made of a pump casing with drain port, helicoidal impeller, mechanical seal, lantern and shaft, connected to the motor shaft by mechanical compression. Thanks to the helicoidal shape of the impeller, the flow is optimized to avoid the obstruction of the pump, allowing solid particles to pass through without being damaged. The RVN centrifugal pump is provided with an internal single mechanical seal. As standard, the stationary and the rotary parts...
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (13721 views)
HYGINOX SEN 15 INTERNALLY SEALED PORTABLE PUMP The INOXPA HYGINOX SEN-15 pump is perfect for new microbreweries. A sanitary centrifugal pump, the Hyginox series comes with a long lasting internal mechanical seal to help reduce product build-up and leaking and improve reliability. It’s a pump that just keeps going without hassle - exactly what you need when starting a brewery. The SEN-20 assembly comes with our Canadian made stainless steel cart, and NEMA 4X digital VFDs. Our carts are custom designed and built in Canada from sanitary stainless steel with non-marring heavy duty wheels. Our VFD’s provide excellent speed regulation from zero to full load over a wide frequency range, auto energy savings at light loads, and smooth motor torque operation. All pumps come standard with Tri-clamp connections, but we can supply other connection types by special order. Horsepower Max Pressure (ft. head) Max Flow (gpm) 1 55 55 1 1/2...
Catalog Ad Posted 7 months ago in New Filters, Filtration, and Pumps by CPE Systems (11630 views)
THE PREMIUM MICROBREWERY PUMP The MB 100 is a re-engineered C100 pump, designed for microbreweries and other small-scale applications. While it maintains compatibility with most C100 parts, it provides added reliability, extended seal life, is easier to adjust and maintain, and provides greater performance. THE MICROBREW 100 USES SIMILAR COMPONENTS TO THE C100. HOWEVER, IT UPGRADES THE EXPERIENCE WITH A NUMBER OF ENHANCEMENTS INCLUDING: A clamped casing for ease of adjustment Sealed impeller design for optimal hygenic performance Split-shaft compression collar to reduce vibration and improve seal life An internal surface finish of <32Ra A silicon carbide stationary seal-face with a carbon rotary seal (aka. DG seal) for improved reliability, dependability and performance. FEATURES: Stainless steel cart 1 1/2" X 1" Tri-clamp connections Stainless steel washdown motor 316L stainless steel construction 304 stainless steel adapter External mechanical DG seal NEMA 4X VFD