Catalog Ad Posted 2 years ago in New Equipment - Misc. by Craft Automation (2306 views)
Looking for an affordable, reliable and easy to use solution for controlling your fermentation vessels from the brewery or remotely? Look no further than the COOLNESS LITE Remote Access Cellar Controller! Providing you remote control and connectivity through any internet-connected device. Feel the freedom and control of supervising the temperature of your Fermentation or Brite Tanks without being tied down to the brewery! COMES STANDARD WITH: Automated Temperature Control of Tanks Email and Text Alert Notifications Over and Under Temperature Alert Notifications Sensor Failure Notifications Alarm Log Tracking Monitoring of Up to 8 Temperature Sensors Control of Up To 8 120v Solenoids (Comes with DIN Connectors) Main Fuse Protection 7” Full Color Touchscreen Display Easy Wall-Mount Installation
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (5918 views)
The CB+ is AMPCO's re-designed C-series centrifugal pump with an internal mechanical seal. This pump is designed specifically for brewing and distilling. It features an internal seal which allows for easy cleaning, prevents pooling on the seal, and permits greater seal pressure with less leaking. It also includes the same collar and threaded impeller nut as the AMPCO AC+. The collar clamps down evenly on all sides of the drive shaft, preventing the minor wobble that can occur from set screwed shafts. The impeller pin is replaced with a threaded impeller nut that fully secures the impeller in place. Two specialized gaskets are used to seal the shaft and to allow a CIP procedure to clean behind the impeller. Together, the collar and bolted impeller reduce rattling at lower speeds. The CB+ AMPCO pump head is attached to one of our efficient stainless steel washdown motors, mounted on a Canadian made...
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (3346 views)
The AMPCO AC+114MD is the original C-series centrifugal pump re imagined. It has kept the original casing design and popular external mechanical seal options, however it features a collar that clamps down on the drive shaft over a full 360 degrees removing the minor wobble that can occur from set screwed shafts. The impeller pin was also replaced with a threaded impeller nut that fully secures the impeller in place; there are two specialized gaskets to seal the shaft and to still allow a CIP procedure to clean behind the impeller. The collar and bolted impeller reduce rattling sounds at lower speeds. The AC+ AMPCO pump head is attached to our stainless steel washdown motor, mounted on a Canadian made stainless steel cart and fitted with a NEMA 4X variable speed control (VFD). FEATURES: 1 1/2″ X 1 1/2″ Tri-clamp connections Stainless steel washdown motor 316L stainless steel construction (wetted parts) 304 stainless steel adapter External mechanical seal Canadian made stainless steel cart NEMA...
Catalog Ad Posted 12 months ago in New Equipment - Misc. by CPE Systems (3016 views)
The MH-20 Hop Induction System (HIS) greatly increases the ease and safety of the dry hopping process. Attached to select centrifugal or shear pumps, the MH-20 HIS hygienically suctions hops into your beer with minimal oxygen introduction. This completely eliminates the need for scissor lifts or shaky ladders, decreasing workload and greatly increasing safety. With the MH-20 HIS just load your hops, start your pump, turn the valve, and within minutes your hops are in the tank.
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (3639 views)
THE CPE C114 PORTABLE PUMP IS THE MOST POPULAR PUMP FOR BREWERIES. The CPE C114 Portable Pump is perfect for systems up to 30 barrels (depending on the application). These are the most durable pumps on the market - and every brewer will tell you that a reliable pump is a must-have for production to run smoothly. The whole process relies on a pump that will transfer product from tank to tank without hassle. The C-series centrifugal pumps are the most common pump used in Microbreweries and Craft Breweries. These pumps will give you years of excellent service and when needed replacement parts are interchangeable with most major brands of sanitary C-series pumps. Our pumps come with stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by spillage. Our Portable Pump Systems are designed specifically for the tough conditions found in food and beverage production. Our carts...
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (3437 views)
This portable pump features the C100MD pump with a 1 HP TEFC motor, a water resistant On/Off switch, a 25 ft molded cable and plug, all mounted on one of our popular stainless steel carts. Technical Specifications 1 HP 3450 RPM TEFC Motor Single phase 115/230 volt or Three phase 230 volt up to 60GPM 24 PSI Ideal for nano breweries and light duty service in large craft breweries, wineries or for anyone needing a light-duty sanitary transfer or small CIP pump.
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (3458 views)
THE CPE C216MD PORTABLE PUMP IS IDEAL FOR BREWERIES PUMPING BATCHES OVER 30 BARRELS. The CPE C216MD Portable Pump is part of the C-series centrifugal pump family. These are the most common pumps used in Microbreweries and Craft Breweries in North America, and in food and beverage production in general. This model is a workhorse pump that will give you years of excellent service and is built with a stainless steel washdown motor that makes cleaning easier and quicker, reducing the issues caused by spillage. These are the most durable pumps on the market! They are designed specifically for the tough conditions found in food and beverage production. The carts are custom designed and built in Canada completely of stainless steel with non-marring heavy duty wheels. The C216 model is a workhorse pump that will give you years of excellent service and when needed replacement parts are interchangeable with most major brands...
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (3347 views)
This portable pump features the C100MD pump with a 1/2 HP single phase motor, a water resistant On/Off switch, a 25 ft molded cable and plug, all mounted on one of our popular stainless steel carts. Technical Specifications 1/2 HP 1800 RPM TEFC Motor Single phase 115/230 volt or Three phase 230 volt up to 25GPM 8 PSI Ideal for nano breweries and light duty service in large craft breweries, wineries or for anyone needing a light-duty sanitary transfer pump.
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (2922 views)
The RVN is a centrifugal pump fitted with a helicoidal impeller. The RVN is the perfect wine pump, but it can also find its use in breweries, distilleries, and other craft food applications. This pump is ideal for pumping liquids with semi-solids, specifically, mash, and must. The RVN 65 has 2 1/2" tri-clamp connections and features a 1 1/2 HP stainless steel washdown motor. RVN is a range of close-coupled centrifugal pumps, characterized by compact design, high efficiency (>70%) and low energy consumption. It is made of a pump casing with drain port, helicoidal impeller, mechanical seal, lantern and shaft, connected to the motor shaft by mechanical compression. Thanks to the helicoidal shape of the impeller, the flow is optimized to avoid the obstruction of the pump, allowing solid particles to pass through without being damaged. The RVN centrifugal pump is provided with an internal single mechanical seal. As standard, the stationary and the rotary parts...
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (3008 views)
HYGINOX SEN 15 INTERNALLY SEALED PORTABLE PUMP The INOXPA HYGINOX SEN-15 pump is perfect for new microbreweries. A sanitary centrifugal pump, the Hyginox series comes with a long lasting internal mechanical seal to help reduce product build-up and leaking and improve reliability. It’s a pump that just keeps going without hassle - exactly what you need when starting a brewery. The SEN-20 assembly comes with our Canadian made stainless steel cart, and NEMA 4X digital VFDs. Our carts are custom designed and built in Canada from sanitary stainless steel with non-marring heavy duty wheels. Our VFD’s provide excellent speed regulation from zero to full load over a wide frequency range, auto energy savings at light loads, and smooth motor torque operation. All pumps come standard with Tri-clamp connections, but we can supply other connection types by special order. Horsepower Max Pressure (ft. head) Max Flow (gpm) 1 55 55 1 1/2...
Catalog Ad Posted 12 months ago in New Fermenters by Daeyoo Tech. (1717 views)
Hi, We have some fermenters (unitanks) in stock, if you are interested, pls contact me to get detailed drawings and prices. Sophie Wu Email: sophiewu@zjdayu.com or daey009@dayuwz.com Thanks and be safe.
Catalog Ad Posted 12 months ago in New Filters, Filtration, and Pumps by CPE Systems (1712 views)
THE PREMIUM MICROBREWERY PUMP The MB 100 is a re-engineered C100 pump, designed for microbreweries and other small-scale applications. While it maintains compatibility with most C100 parts, it provides added reliability, extended seal life, is easier to adjust and maintain, and provides greater performance. THE MICROBREW 100 USES SIMILAR COMPONENTS TO THE C100. HOWEVER, IT UPGRADES THE EXPERIENCE WITH A NUMBER OF ENHANCEMENTS INCLUDING: A clamped casing for ease of adjustment Sealed impeller design for optimal hygenic performance Split-shaft compression collar to reduce vibration and improve seal life An internal surface finish of <32Ra A silicon carbide stationary seal-face with a carbon rotary seal (aka. DG seal) for improved reliability, dependability and performance. FEATURES: Stainless steel cart 1 1/2" X 1" Tri-clamp connections Stainless steel washdown motor 316L stainless steel construction 304 stainless steel adapter External mechanical DG seal NEMA 4X VFD
Catalog Ad Posted 12 months ago in New Equipment - Misc. by Daeyoo Tech. (1282 views)
Hi Guys, We have a 500L mash lauter tun, 2-500L fermenters, 1-1000L bright beer tanks, 5-300l bright beer tanks in stock, if you are interested, pls feel free to contact me to get the prices and drawings. E-mail: sophiewu@zjdayu.com or daey009@dayuwz.com Mob: 0086-15867759507 or 0086-18966261717 Skype: sophiewu1989 Whatsapp: 008615867759507 Wechat: hustersophiewu
Catalog Ad Posted 12 months ago in New Equipment - Misc. by Cask Global Canning Solutions (1898 views)
Cask offers the lowest minimums for printed can supply, as well as terms fit for our small business customers. If your business or one you know is concerned about can supply during this time - printed or brite - don't hesitate to reach out. Half truck orders Free storage for 6 months Interest free financing options after first order Dedicated in-house team for order fulfillment Reach out for a quote if we can be of help: www.cask.com/contact +1 403 640 4677 (US/Canada) +44 20 3514 5779 (Europe) Please note an important update: Ball Corporation is classified as a "Critical Infrastructure" sector business and will continue full-scale production of aluminum cans. Wishing everyone in our community strength and the health.
Catalog Ad Posted 12 months ago in New Packaging Equipment by Cask Global Canning Solutions (3547 views)
The Cask mACS is the micro-canning industry's most flexible canning system, specifically engineered to allow one system to handle the entire craft beverage market and nearly every can size. The mACS combines Cask’s industry leading fill technology and seaming reliability in an incredibly compact footprint at 25 cans per minute. The mACS features a redesigned universal “one-size-fits-all-diameters” stainless steel fill head that allows for easy can changeover, individual fill head control for extreme accuracy, and Cask’s fill sensing probes that keep product waste below 1%. Cask Micro-Automated Canning System (mACS)
Catalog Ad Posted 12 months ago in New Fermenters by Jinan NFE Machinery Co (5513 views)
New 80BBL jacketed beer fermenters, good quality good price! •25% top space to avoid beer foam out; • Accommodate to brew 1/2 batches • 2” pressure vacuum relief valve • Kieselmann adjustable pressure relief valve • 1.5” sample valve • Pressure gauge • CIP – rotary spray ball • CO2 blow off tube • Rotating racking assembly • 60 degree cone • Multiple glycol zones • Fully welded cladding • Adjustable tank leveling pads • Carb Stone 2” TC assembly • RTD Probe • 4″ or 6''Hops port • 2″ Butterfly valves • Tension braces on legs • Good quality, reasonable price and excellent quality Please contact us for price and details! NFE Machinery Co., Ltd. Email: info@nfebrew.com Website: www.nfestainless.com Tel: +86-531-88765318 Fax: +86-531-88765328
Catalog Ad Posted 12 months ago in New Nano Brewing Equipment by Jinan NFE Machinery Co (10694 views)
3.5BBL brewing system specification equipment list is as follows: 3.5bbl Steam, Electric or Direct fired brewhouse Mash/lauter – grist hydrator, false bottom, rake, sparging Wort kettle/whirlpool tun – steam jackets/electric/direct fired, tangential entry Pumps with ABB motor Brewhouse with Skid and skid with wheels Stainless steel 304 working platform Plate heat exchanger – 304 or 316 plates Wort grant, hops back Pipelines & valves Hot liquor tanks and pumps 3.5bbl and 7bbl jacketed fermentation tanks/brite tanks Grain Miller Glycol Chiller and Glycol tank CIP unit system Manual button control system, UL/CE Rated Controls and electrical components Quick-wear parts Great quality, reasonable price, excellent service! Complete engineering support and onsite installation! Please feel free to contact us for more details! NFE Machinery Co., Ltd Tel:0086-53188765318 Email: info@nfebrew.com Web: http://www.nfestainless.com
Catalog Ad Posted 12 months ago in New Storage Tanks by Jinan NFE Machinery Co (6476 views)
New 30bbl jacketed brite beer tanks for sale: •20% top space to avoid beer foam out; • Accommodate to brew 1/2 batches • 2” pressure vacuum relief valve • 1.5” sample valve • Pressure gauge • CIP – rotary spray ball • CO2 blow off tube • Multiple glycol zones • Fully welded cladding • Adjustable tank leveling pads • Carb Stone 2” TC assembly • RTD Probe • 1.5” and 2″ butterfly valves • Tension braces on legs • Good quality, reasonable price and excellent quality Please contact us for price and details! NFE Machinery Co., Ltd Email: info@nfebrew.com Web: www.nfestainless.com Tel: +86-531-8876-5318
Catalog Ad Posted 12 months ago in New Brewhouse or Brewing Systems by Jinan NFE Machinery Co (7523 views)
NFE Machinery Co. ltd is a top professional designer and manufacturer of high-quality, complete craft beer brewing systems, Our systems are based on German designs, and using all certified international standard 304 grade stainless steel and sanitary materials, please click our website:www.nfestainless.com. 40BBL brewing system specification equipment list is as follows: 40 bbl Brewhouse – 4vessels brewhouse, steam jacket heating Mash vessel – with mixer, frequency drive, with steam jacket heating Lauter tun – false bottom, rake system, sparging Boiling Kettle-steam jacket heating and steam calandria Whirlpool tank- tangential whirlpool entry Pumps with ABB motor Stainless steel 304 working platform A sink and sample station installed on the brewing platform Plate heat exchanger – 304 or 316 plates 40 bbl/80 bbl/120bbl fermentation tanks/bright beer tanks 80bbl HLT and CLT Glycol cooling system(Glycol tank, Glycol chiller) CIP system Grain mill system(Grain miller, Flex Auger, Grist Case) PLC Siemens control system, UL...
Catalog Ad Posted 12 months ago in New Brewhouse or Brewing Systems by Jinan NFE Machinery Co (6846 views)
NFE Machinery Co. ltd is a top professional designer and manufacturer of high-quality, complete craft beer brewing systems 1bbl-100bbl in China and offers excellent service and affordability. We supply turnkey service to create the best value with an affordable cost for each customer. beside, HS Code number: 843 84 000 for beer brewing equipment has yet to hit with the new tariffs – that could change still exempt from the rate hikes, currently the import tariff rate is also about 2.3%, so don’t worry about to purchase the brewing equipment from China! 5BBL brewing system specification equipment list is as follows: 5bbl Steam, Electric or Direct fired brewhouse Mash/lauter – grist hydrator, false bottom, rake, sparging Wort kettle/whirlpool tun – steam jackets/electric/direct fired, tangential entry Pumps with ABB motor Stainless steel 304 working platform Plate heat exchanger – 304 or 316 plates Wort grant, hops back Pipelines & valves 10bbl Hot liquor...