Latest Brewing Equipment Classified Ads

Reset - Viewing: Used Product Ads

Used Product Ad posted 2 weeks ago in Brewhouse or Brewing Systems by Stoney Head

4 BBL Brewhouse for sale, purchased new in 2014, 3 vessels (kettle, mash tun, HLT).  Kettle is 4.5 BBL dish bottom (rated for 4) with sight glass, whirlpool arm, thermometer, racking port and dump arm. Mash tun comes with one piece removable false bottom and manway to extract spent grist.  Hot liquor tank (HLT) comes with transfer port.  180,000 BTU propane burners for each tank is included (jets are NOT interchangeable to natural gas).  Black gas pipe shown is included.  All 3 vessels come with SS lids and top ports. PRICE REDUCED  $8,000

Used Product Ad posted 2 weeks ago in Bottling Equipment by Stoney Head

CBK Filler IFC 6-6 Automatic Filler and rinse table for sale.  Fully automated counter pressure filler for filling 12 ounce long necks and 22 oz bombers. Double evac CO2 and automatic crowner.  Comes with a 24 bottle rinse table for both sizes.  Currently set for 12 oz but can be changed out for 22 oz bottles.  We achieved a fill rate of approximately 16 cases an hour.  Manual load in and out of bottles. Machine works great and has been lightly used!  Original list price was $60,000 new. Asking $14,000.  PRICE REDUCED You pay shipping from Reno, NV (89511).  Item will ship in the original manufacturers crate.    

Used Product Ad posted 2 weeks ago in Kegs and Kegging Supplies by Brook Baber

You read correctly, SANKE TAPS - THESE 1/2 BBL HOFF-STEVENS KEGS ARE ALREADY CONVERTED! This means they will serve on most any draft system without you having to purchase a dedicated Hoff-Stevens coupler. When most towns have at least one brewery, are you looking for something to make your taproom stand out?  Do you want there to be a “buzz” for the special kegs you are tapping? And most importantly, taprooms must give customers a reason to come and pay for the single most profitable pint a brewer can sell. These kegs give the flexibility of real ale to the brewer (same design but bigger, no dinky firkins here) and an ability to do truly unusual pilot or one-off kegs by infusing, or even naturally carbonating. Infused Taproom Editions? Real shandies? Kombucha? Ginger Beer? House Sodas? In a time when distribution took a back seat to the brewer and the cellarmen, the...

Used Product Ad posted 2 weeks ago in Brewhouse or Brewing Systems by Stoney Head

4bbl brewing system purchased new in 2014 consists of the following: 4bbl Brewhouse 3 vessel (kettle, mash tun, HLT) w/3 propane 180,000 BTU burners 1 -Micromatic 3/4 HP glycol pack, 208/220V  3 phase 1- Two roller grain mill, 208/220V 3 phase CBK 6-head bottling line for both 12oz. long neck and 22 oz. bottles We also listed these individually. You save $7500 by purchasing all of it together. PRICE REDUCED AGAIN! Shipping not included from Reno, Nevada.  Please email for additional info and pics.

Used Product Ad posted 2 weeks ago in Fermenters by Black Market

(7) 8.5 bbl Horizontal foeders built by Foeder Crafters of America.  Comes with spray balls, CIP Arms, sample valves,  and stand for all 7.

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Stoney Head

2 Roll grain mill for sale, side by side 14" rollers, hopper on top, grain shoot on bottom, adjustable crush size, access panels for easy cleaning, must have 208/230V 3 phase power supply, 26A.  We purchased this brand new in 2013 and it has been a workhorse for our brewery.  Currently set up for plug in to run but can easily be converted to a wall switch.  New drive belts replaced 2019.  Comes with back up belts.  Weighs roughly a ton (2000 lbs). PRICE REDUCED $3000.00 You pay shipping from Reno, Nevada (89511)

Used Product Ad posted 2 weeks ago in Other Cooling and Heating Equipment by Stoney Head

Micro-matic 3/4 HP, 5100 BTU glycol pack, purchased new in 2014, dual pumps, can be used for trunk beer lines (up to 350') or direct tank control, replaced digital controls in 2018, replaced 1 pump in 2019.  Requires 230V, single phase power. Coolant gas is R134A, 11.5 Gallon glycol bath. Dimensions are roughly 29'' x 18"x 30" high. Weighs around 170 pounds.  If you are reading this ad, it is still available.  PRICE REDUCED $2500 You pay shipping and crating from Reno, NV 89511

Used Product Ad posted 3 weeks ago in Nano Brewing Equipment by Trevor Gordon

1/2 bbl Sabco Brewmagic V350MS Brewing System, Purchased new in 2016.  Two 27 Gallon Morebeer Heated and Cooled Fermenters included. Pick-up in St Albans, ME

Used Product Ad posted 2 months ago in Chillers by J C Younger Company

USED 3hp AVT single phased chiller currently we have qty 3 of them on hand right now ready to start cooling beer again.  Some have a new compressor installed in them. Factory new 3 HP Indoor rated deluxe brewery chiller all in one system with Copland hermetic compressor. (we also have several outdoor factory new 5 HP Pro / JCY chillers as well) The application temp range is as cold as 25F, to as warm as 70F LGT. Unit is 208/230 volt single PowerPoint power connection. Compact design, lightweight, and on casters for easy mobility.     We also have slightly used or reconditioned chiller systems, glycol, glycol piping, and cooling coils for walk-in cooler rooms, used air-condoning systems, Belimo or other glycol Solenoids, and much more.   Please contact us at sandy@jcyounger.com for more info or conversation. Please use Promo: Probrewer ads when you contact us.  You'll get a...

Used Product Ad posted 2 weeks ago in Cleaning Supplies and Chemicals by Red Rover

Hankin Ozonator for producing ozone air and water for cleaning. Comes with manuals and stand, can palletise, rig and assist with sourcing shipping. $2900 or best offer.

Used Product Ad posted 10 months ago in Fermenters by Black Forest Container Systems

Larger Size Fermentation Tanks/Brite Tanks/Unitanks! 11bbl Jacketed Fermentation tanks in stock at our warehouse in Greenville, SC! Available to Ship Today! These units are manufactured in Germany and are made of the highest quality stainless steel (AISI 304) while using state of the art laser welding equipment to assure sanitary welds throughout the vessel.  Each 2Bar rated tank is equipped with sidewall jacket,  sanitary Triclamp ferrules on the lower sidewall for multiple combinations racking arm, carb stone, sampling, thermowell and or level sensing and are forklift/pallet jack transportable. 3” Triclamp ferrule in the top lid can be used with your sprayball CIP cleaning system. You choose how you want to configure the tanks specific to your process without additional cost for “hang on gear” you do not need. Flexibility with quality and value.

Used Product Ad posted 10 months ago in Fermenters by Black Forest Container Systems

*Immediate Shipment Available from Greenville, SC Brand New Units in Stock These jacketed brite and unitanks are manufactured in Germany and made of the highest quality stainless steel (AISI 304) while using state of the art laser welding equipment to assure sanitary welds throughout the vessel. Each 2Bar rated tank is equipped standard with sanitary Triclamp ferrules on the lower sidewall for multiple combinations racking arm, carb stone, sampling, thermowell and or level sensing. The 3” Triclamp ferrule in the top lid can be used with your sprayball CIP cleaning system. You choose how you want to configure the tanks specific to your process without additional cost for “hang on gear” you do not need. Flexibility with quality and value.

To top