Two 25bbl fermenters/uni-tanks $6,250 (each) ( $6,250 )
Tanks are in good condition but have been sitting out behind the brewery so they’re a bit dirty. They were designed to be used as uni-tanks so they have successfully held 16+ psi for a number of years without issue. Tanks are undressed (no valves, carb stones, etc). Lastly we had to cut the support arm for the dump port so that we could move it around with a forklift without a boom. You can weld it back together, but we just used a HP tri clamp and that did the trick.
Also, one of the tanks has DIN fittings for the glycol ports, and the other is NPT.
Based on height these will need to be loaded onto the back of a truck on their side for shipping.
Used from: 2/2016 – 11/2019
Total Volume: 32.5 bbl
Height: 12’3″ (when CIP is attached, 11’8″ when not attached)
Chilling Area 6.2m2
Dump ports: 2″
Glycol ports: 1″
Dry hop ports: 4″
Carb stone ports: 2″
Blow off arms: 2″
CIP arms: 1.5″
Buyer pays for and sets up rigging and shipping.
Any questions feel free to email me: firstname.lastname@example.org