Features

• Draws from pre-mixed solution
• Powered by compressed air
• Hinged back plate provides tool-free access to components
• Quick-change pump
• Pump seal material options Santoprene, Viton, or Kalrez
• Natural color tank for easy visibility of product levels
• Hinged lid
• Integrated hose wraps
• Front-facing drain
• In-line strainer to protect pump from debris
• Anti-kink hose protection

Specifications

power type: Compressed air
chemical pickup type: Draws from pre-mixed solution
number of products unit can draw from: One product
suction line length/diameter: 3/8 in. (9.5 mm) inside diameter
capacity: 12.5 gallons (47.32 liters)
discharge hose diameter/length: 20 ft. (6 m) hose, with 1/2 in. (12.7 mm) inside diameter
discharge wand/tip type: 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
output distance: 15-20 ft. (4.6 to 6 m)
output volume: 15-30 gal/min (57 to 144 l/min) of foam
flow rate*: 2 gal/min (7.6 l/min)
pump seals: Santoprene, Viton, or Kalrez
wheel type: Two 10 inch non-marking wheels

 

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

 

Requirements

compressed air requirements: 40-80 psi (3-5 bar) with 5-8 cfm (141-227 l/min)
liquid temperature range: 40-100˚F (4.4-37˚C)
chemical compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

• Manufacturer : FOAMit
• Original Manufacture Date : 2018
• Where Manufactured : United States
• Ships From : 1638 142nd Ave, Dorr, MI
• Part Number(s) : FI-10N

1. View all listings by this user
2. Report abuse

Contact this listing owner

Please Login or register to contact the poster of this classified ad.