Automatic monoblock in stainless steel composed by:

1.) Rinsing machine with 6 places in stainless steel for bottles with maximum diameter 115 mm. A gripper device takes the bottle by the neck and -through a system of sprocket-wheel-rack pushed by a cam – turns it upside down. The nozzle enters in to the bottle neck for 80mm; there is injection only in bottle presence. There is no contact between the bottle neck and the injector parts. The two injection circuits are completely separated. The injection time and set up are easily adjustable by an external cams system. The gripper then turns the bottle and releases it in the discharge star which carries it onto the conveyor belt.

2.) 6 spout pressure filler for bottles with maximum diameter 115 mm with:

Bottle double pre-evacuation: it breathes in the air contained in the bottle, it replaces this air with pressurized CO2 it breathes in the air again before equilibrating the bottle pressure with the gas contained in the tank. In this way it eliminates ~ 95% of the oxygen contained in the bottle. It uses a fluid ring pump equipped with water recycle tank

3.) 1 head crown capper feed up by vibration

The entrance and the transfer between rinsing and filling are made by infeed screw that drive and synchronize the bottles.

The monoblock is supplied with:

– Safety guards in accordance with CE standards

– Devices for rinser sterilization

– Dummy bottles for filler sterilization

Equipped for one type of cylindrical bottle

 Speed 600-1.100 bottles/hour (INVERTER)

• Manufacturer : CIME
• Where Manufactured : ITALY
• Part Number(s) : CIME 661

1. View all listings by this user
2. Report abuse

Contact Details

Available from Prospero Equipment Corporation
(Main Headquarters) 123 Castleton St.Pleasantville, NY 10570
United States Phone: (914) 769-6252, Toll-Free: 1-800-953-3736, Fax: (914) 769-6786 ***** Prospero Equipment Corporation Allied Trade Profile