Kettles, HLT, Thermal Exchange, hoses, clamps ( $800 )
HotUsed Brewing Equipment - Misc. / Classified Ad Posted 2 weeks ago by by Alex Ingalls / 11580 views
For Sale: 5, 75 Gallon Brew Kettle – with Tangential Inlet, Sight Glass (Direct Fire); used once. $1000 + shipping (freight est. $1000 for all 5) https://conical-fermenter.com/75-Gallon-Direct-Fire-Brew-Kettle.html
Spec:
- Material: Premium virgin 304 stainless steel
- Maximum Capacity: 75 gallons
- Tangential Inlet
- Flat Bottom
- Sanitary Sight Glass
- (2) Sanitary 3/4″ Ball Valves
- (2) 1/2″ Sanitary Hose Barbs
- Welded-in 3″ Thermowell with 1/2″ NPT fitting
- Dial Thermometer
- 1.5″ Tri-Clamps and Gaskets
- Diameter = 25″; Height = 35.5″; Steel Gauge = 1.5mm
_________________________________________________________________________
For Sale: ½ HP Mobile Cart Pump with internal seal, self-priming, 20 ft cord; barely used, like new $1900 + shipping (freight est. $400) https://www.brewmation.com/product/1-2-hp-cart-pump
_________________________________________________________________________
For Sale: 5 BBL/200 gal. Insulated Hot Liquor Tank with thermowell, tangential inlet, sight glass, (4) 1.5“ TC ports for electric element, (1) 1.5” TC port for level sensor, (2) 1.5“ butterfly valves, 3/4” NPT inlet near top for water inlet, 3“ TC port in lid for cleaning (spray ball sold separately). Includes sloped bottom. For 30/24kW systems (4x6kw elements).
Dimensions: Ø41.5” x 56.5“H (excluding the lid). Lid adds approx. 3” to height.
**Standard 3 Phase 208V 90 AMPs**
24KW 5 BBL Kombucha panel
Electric Controls Base (Basic 1-tank)
208V-240V
Single or three phase
Internal GFCI protected breakers for heating elements.
1ea. LOVE controller
Heat on/off switch
POWER REQUIREMENTS:
The system is set up to accept the following circuit sizes.
1) Single-phase – 125 amps
2) Three-phase – 90 amps
HLT Heaters / temp probe / float 24K
4 ea. 6000 Watt heating elements (total wattage 24,000 watts).
1.5” Tri-clamp base.
1 ea. Temperature probe
1 ea. Stainless safety float switch
All elements are individually GFCI protected
Only used a handful of times, started Dec 2019; condition like new. Will include hoses, clamps, & gaskets. Asking $4000 + shipping.
For sale: Custom Kombucha Tea heat exchanger made to bring 5 bbl of 200*F Tea down to 85*F in 45 mins
Tea chiller: Cold water inlet temperature = 75 F max.; Tea output = 85 F min. Cast out 5 bbls in 45 minutes. Single Stage Thermaline Wort Chiller Model T4 – S-12 with powder coated steel frame, TAB FEET and 316SS chilling plates, TC fittings. A set of parts to allow you to monitor the temperature of the wort chiller output right at the wort chiller. Clamps & Inline Wort Thermometer included, Range: 30 to 180F. Stem length = 3.25“.
Advantages: -Faster response because there is no thermowell -More sanitary than a thermometer with a threaded NPT fitting
Uses: -Install on fermenters and brite beer tanks -Install in a standard tee to measure wort temperature as it leaves the wort chiller -Install in a standard tee to measure wort temperature as it leaves a HERMS coil -Install in a standard tee to measure strike water temperature as it enters the Mash Tun.
Only used a handful of times; condition like new. Asking $2200 + shipping; https://conical-fermenter.com/Wort-Chiller.html
For Sale: Kit of commonly needed parts for a “Frankenbrew” keg washer. Unused, condition brand new. Asking $800 + shipping; similar to system pictured in video but has 8 filler heads. https://www.youtube.com/watch?v=Bl6pxAV32t4
- Manufacturer : Stout Tanks
- Original Manufacture Date : 11/2019
- Where Manufactured : USA
- Ships From : Brookyln, NY, USA
Leave a Reply
You must be logged in to post a comment.