Grain Mill [$1,499.00]Hot
Custom built mill. 1.5 hp 115v/220v direct drive.
Mill has an output of 11-11.8lbs/minute or 660-708lbs/hr.
Crankandstein 328G mill in it. This whole mill (side plates, 3 rollers, bearings) was replaced with a whole new set up on 1/18/19.
It has a 1.5hp direct drive motor with a gear reducer running a straight shaft into the mill. It runs at 266 rpm. The motor is wired to run 110 or 220. We have it running 220 with 2 separate push button on/off switches.
The top of the hopper is 41″ off the ground.
The top of the motor and mill are 28″ off the ground.
The bottom outlet where the milled grain comes out of is 10″ off the ground.