GAI MLE 6661 CANNING MACHINES IN STOCK! 26 CPMHot
In stock GAI Canning monoblock machine.
MLE 6661 CAN – Linear automatic monoblock in stainless steel with FLAT inox frame composed of:
 N° 6 Double-phase LINEAR electropneumatic rinser-blowers made in stainless steel suitable for cans with maximum diameter of 85mm. Cans are grasped from the external top rim by a pincer and turned upside down through a chain system with step-step motor. The nozzle enters the can for 15mm. The two injection circuits are completely separated. The duration of injections is adjustable through control panel and the operation occurs only when the can is present. The dripping liquid is collected in a close circuit without wetting the machine. The air injection substantially reduces the water residue in the can.
 N° 6 HIGH PRESSURE LINEAR electropneumatic fillers for cans with maximum diameter of 85mm.
Each valve includes:
• Can presence sensor.
• Pressure transducer to control the pressure in can (the valve does not start filling if the can does not reach the tank pressure)
• Electropneumatic valve on each spout, to allow, if the can is present, the injection, the pressure compensation, the auto-levelling and the de-gassing.
• Double effect electropneumatic piston on each valve for gas injection circle opening and closing.
• Double effect electropneumatic piston on each valve for gas returning circle opening and closing.
 N° 6 Linear CAN LIDS dispenser with gas injection and foaming jet. The lids are singularly released from the loader and dropped on a sideshifter. The sideshifter moves the all lids simultaneously above the cans. Then, the inert gas injection and water jet for beer foaming are performed. At the same time, the lids are collected by the gripping devices and laid on the cans with a light pressure when the sideshifter withdraws. The two circuits are completely separated. The injections duration is adjustable through control panel and performed only when the can is present.The neutral gas injection and the water jet for beer foaming substantially reduce the oxygen quantity in the space underneath the lid.
 4310L single-head seamer in stainless-steel to seam the lid. The intermittent star moves the can on the lifting plate, which lifts it and brings it next to the rotating spindle. While the can turns, the two rolls seams it. All operations are controlled by mechanical cams.
The inlet and transfer among the stations takes place with an universal infeed screw that guides and synchronize the cans.
Electrical height adjustment of all stations (rinser, filler, can lids dispenser and seamer).
The working in line is designed only in siding.
Output 650 liters/hour