GAI Integrated Sparkling Glass Bottle Monobloc System ( $47,500 )Hot
An integrated high-end reliable Sparkling Glass Filler with Corker and Wirehooder.
This was put together by Prospero in 2014 for Mystic Brewery in MA before they shut down in 2020, and has been stored in a heated warehouse for a little over a year.
System cost 175K back in 2014.
I intended to put it to good use, but with COVID that did not happen, therefore I need the space, and am letting it go.
Here’s a description of the Main 1305 GAI Monobloc Filler/capper:
Automatic monobloc in stainless steel made of:
■■ Rinser with 9 places in stainless steel for bottles with 115mm max diameter. Electrical height adjustment.
■■ Bottle deaeration station. A high vacuum pump takes out about 90% of the air inside the bottle. After that the bottle is filled with neutral gas chosen by the customer (Nitrogen or CO2). Electrical height adjustment.
■■ 8 spouts gravity filler with light depression. The filling valves (patented) cut off both the wine and the gas return, excluding any contact
between the inside of the tank and the environment. The filling level changes between 30 and 90mm from the top of the mouth.
The filling valves have got an open position for washing and sterilization. The pedestals of the bottles are mechanical with thrust by spring and return by cam.
■■ Gas injector before corking reduces the oxygen quantity between wine and cork (the injector has dummy bottle for its own sterilization).
■■ The corker 4140W closes the cork slowly to a diameter of 16mm by using 4 stainless steel prismatic guide jaws hardened, ground and polished. It creates the vacuum in the bottle neck by a high vacuum pump so that the fast introduction of the cork would not
create any pressure and avoid any risks of dripping.
The bottles inlet and the transfer from rinser to filler are synchronized by infeed screws.
Monobloc supplied with safety guards in accordance with CE standards.
Machine is equipped with:
• Micro switch to check bottles descending at the end of filling stage
• Centralized valves opening for the sterilization.
• Filler tank with big thickness and high polishing.
• Electrical height adjustment for rinser
- Electrical height adjustment for corker
- Glass Bottles H from 240 to 370mm +/-5
- Glass Bottles D From 70 to 115mm +/-2
Speed: 400-1600 btls/hour
Output: 1000 ltr/hour
For original Auction posting and more photos, including the official Budgetary Quotation, check out: https://www.bidspotter.com/en-us/auction-catalogues/bscpau/catalogue-id-bscpau10117/lot-b3e8e1ce-5f67-4236-9cc4-abc9002ab945