Complete 20 gallon Spike Brewing System with eight 10 gallon Spike Fermenters and glycol system. Everything you need to start a nano brewery ( $8,900 )Hot
20 gallon electric spike brewing system with NPT fittings, pumps, hoses, and table. Bought new a year ago. Link to spikes website here for list of everything
We did around 125 batches, usually a few batches a week. Temp sensor wires going from the kettles to the control panel can be touchy, if they’re nudged the temp reading will jump so we just make sure we don’t touch them during brewing day. It could just be loose wiring but we never checked. The wort pump switch can be finicky, Spike Brewing sent a replacement but didn’t resolve the issue so we normally just plug the wort pump into a wall outlet when we need it.
One Immersion wort chiller
Eight 10 gallon Spike stainless steel fermenters (cf10) with temp control coils bought new a year ago.
Glycol Chiller system. Uses glycol draft system to chill glycol mixture in a sealed chest freezer which then pumps glycol to distribution system with solenoids for each fermenters controlled by Inkbird Itc-308
Water filter system
Photo album link https://photos.app.goo.gl/kS2veKWsEJ3EwvAi7