CB+ 216 Portable Pump Assemblies ( $4,225 )Hot
The CB+ is AMPCO’s re-designed C-series centrifugal pump with an internal mechanical seal. This pump is designed specifically for brewing and distilling. It features an internal seal which allows for easy cleaning, prevents pooling on the seal, and permits greater seal pressure with less leaking. It also includes the same collar and threaded impeller nut as the AMPCO AC+. The collar clamps down evenly on all sides of the drive shaft, preventing the minor wobble that can occur from set screwed shafts. The impeller pin is replaced with a threaded impeller nut that fully secures the impeller in place. Two specialized gaskets are used to seal the shaft and to allow a CIP procedure to clean behind the impeller. Together, the collar and bolted impeller reduce rattling at lower speeds.
The CB+ AMPCO pump head is attached to one of our efficient stainless steel washdown motors, mounted on a Canadian made stainless steel cart, and controlled with a NEMA 4X variable speed control (VFD).
- 2″ X 1 1/2″ Tri-clamp connections
- Stainless steel washdown motor
- 316L stainless steel construction
- 304 stainless steel adapter
- Canadian made stainless steel cart
- NEMA 4X VFD
3 HP The capacity of this pump is 150 GPM and it will put out 100 ft of head pressure
5 HP The capacity of this pump is 150 GPM and it will put out 125 ft of head pressure
7 1/2 HP: The capacity of this pump is 200 GPM and it will put out 175 ft of head pressure
10 HP: The capacity of this pump is 250 GPM and it will put out 175 ft of head pressure
15 HP: The capacity of this pump is 275 GPM and it will put out 125 ft of head pressure