BrewBilt® hand crafts high quality brewing systems that are designed around your specific brewing needs. Built by talented craftsmen in Northern California using the finest American 304 stainless steel. Every BrewBilt® brew system features superior efficiency with an intuitive ergonomic design. From our compact Pilot system to our powerful Pub and Production systems, BrewBilt® has you covered, and we’ll be with you every step of the way during the life of your brewery. We look forward to learning your story and helping craft your perfect brewery.

10-15 BARREL PRODUCTION CAPACITY

The Pub System is ideal for a high volume neighborhood brewery—whether your operation is just starting out or scaling up from a smaller brew house. When combined with larger cellar vessels, the mid-range sizing of this system gives the brewer the ability to move into larger production volume without the initial investment into a large production system. BrewBilt’s 10-15 BBL Pub Systems feature the same reliability, durability, and performance of our largest production systems. BrewBilt® Pub Systems are available in 2, 3 or 4 vessel configurations; steam or direct fire.

MASH TUN

• 100% American Sourced 304 Stainless Steel

• 12 Gauge Interior

• 14 Gauge Exterior

• Optimal designed Conical Top And Bottom

• Independent Bottom And Side Wall Steam Jackets

• 2” Roxul Insulation Layer

• Mash Mixer

• SEW Eurodrive Electric Drive Motor w/ VFD

• Flexible Impeller Transfer Pump w/ VFD

• Grist Hydrator

• Grist Slide Gate

• CIP

• LED Tank Light Available

• Glass Manway

LAUTER TUN

• 100% American Sourced 304 Stainless Steel

• 12 Gauge Interior

• 14 Gauge Exterior

• Conical Top

• Wide, Shallow Grain Bed

• 2” Roxul Insulation Layer

• Multi-Point Collection Manifold

• V-Wire False Bottom

• 1” Dead Space Below False Bottom

• Independent Above And Below False Bottom CIP

• Grain Rakes (Height Adjustment Available)

• Grain Plow

• Pneumatic Actuation Available

• SEW Eurodrive Electric Drive Motor w/ VFD

• Dual or Triple Sparge Nozzles

• Vorlauf Splash Plate Return

• Glass Manway

• LED Tank Light Available

• Side or Bottom Grain Out Manway

• Grist Hydrator (Mash/Lauter Combo Tank)

• Grist Slide Gate (Mash/Lauter Combo Tank)

BOIL KETTLE 

• 100% American Sourced 304 Stainless Steel

• 12 Gauge Interior

• 14 Gauge Exterior

• 75% Head Space

• Optimal designed Conical Top and Bottom

• 2” Roxul Insulation Layer

• Independent Bottom And Side Wall Steam Jackets (Steam System Only)

• Steam Calandria Available (Steam System Only)

• Modulating Natural Gas Forced Air Burner w/ Fire Box and Gas Flue (Indirect Fire Only)

• Non-Aerating Wort Inlet

• Wort Dilution

• 1.5” Tangential Whirlpool Inlet

• 1.5” Outlet Above Trub Pile

• 3” Dump Drain

• CIP

• LED Tank Light Available

• Steam Flue Vent

• Condensation Drip Ring Drain

• Glass Manway

WHIRLPOOL 

• 100% American Sourced 304 Stainless Steel

• 12 Gauge Interior

• 14 Gauge Exterior

• Optimally designed Conical Top and Bottom

• 2” Roxul Insulation Layer

• 1.5” Tangential Whirlpool Inlet

• Tube-and-Shell Whirlpool Heat Exchanger Available

• Glycol Jacket Available

• Glass Manway

• LED Tank Light Available

• Dedicated Pump

HOT / COLD LIQUOR TANK (10-200 BBL)

• 100% American Sourced 304 Stainless Steel

• 12 Gauge Interior

• 14 Gauge Exterior

• Optimal designed Conical Top And Bottom

• 2” Roxul Insulation Layer

• Steam, Indirect Fire or Electric Heating Available

• Sight Tube

• Calibration Strip

• Recirculation Ports

• Multiple Inlets/Outlets

• CIP

• Dedicated Transfer Pump

• Low Level Sensor

• Overflow Drain Pipe

• Manway

HOT/COLD LIQUOR MANIFOLD:

• Automated Temperature Control

• Modulating Hot/Cold Valves

• Mix Tube

• IFM Magnetic Flow Meter/Thermometer

• Flow Totalizer w/ Solenoid Valve

• Direct Feed To Sparge and Grist Hydrator

DIGITAL CONTROLS

• UL Listed

• Custom Built To Spec

• NEMA 4X Wash Down Stainless Steel Cabinets

• Touch Screen PLC

• Custom Programming

• Programmable Mash Schedules

• Full Schematics Included

• Pump/Motor VFDs

BREW DECK

• 100% American Sourced 304 Stainless Steel

• 4” and 2” Heavy duty Square Tubing

• Fiberglass Safety Grating

• Swing Arm Transfer Manifold

• Stair Case

• Railings

LAB INSTRUMENTATION FOR WORT ANALYSIS

• Anton Parr Options

• Hard Piped Into System

• Manufacturer : BrewBilt Manufacturing
• Where Manufactured : USA
• Ships From : Grass Valley, CA

1. View all listings by this user
2. Report abuse

Contact Details

Available from BrewBilt Manufacturing Inc.
110 Spring Hill Drive #10Grass Valley, CA 95945
US Phone: 530-802-5023 ***** BrewBilt Manufacturing Inc. Allied Trade Profile