Beautiful Turnkey Copper clad steam fired15bbl+ Brewery $229K [$229,000.00]Hot
This is a beautiful copper clad, steam fired brewery that has everything you need. It is in great condition and currently in operation, but ready for sale. Buyer is responsible for loading and shipping. 5 Unitanks and 9 serving tanks. HLT, CLT, mill, boiler, etc.
We have used it as a 15 bbl system, although you can brew both smaller batches and larger batches. The brewhouse is oversized to about 20 bbls and several of the tanks can handle this larger batch size.
Brewhouse: Copper clad, 2 vessel mash/lauter and kettle/whirlpool, steam fired, about 20 bbl capacity. Mash/lauter: Variable speed mash mixer, automated grain out, grist hydrator, grant system w/ automated pump controller w/ low/high sensors, 2 variable speed pumps, diverter panel, CIP, etc. Kettle/whirlpool: CIP, condensate ring, exhaust fan, 2 zones for steam, etc. O2 stone cast rig.
(1) 900 gallon HLT. Copper clad, steam solenoid w/ manual bypass built in, approx 107″ tall and 66″ diameter, HLT pump mounted
(1) 900 gallon CLT
On the fermentation tanks, there are 5 total. Originally they were designed to be placed in an A frame window so there are three different sizes. All can hold a minimum of 15 bbls (or less) so the sizing gives you a lot of flexibility for batch sizes if needed. All fermenters are Stainless unitanks w/ copper banding, 3 zone cooling including cone, 2 bottom exit ports, 1 stand pipe, sample port, separate CIP arm, spray ball, prv. See below for sizes.
(2) 15 bbl
(2) 22.5 bbl
(1) 30 bbl
There are 9 serving tanks total. Some are sized differently. See below. They are all jacketed, copper clad, dish bottom w/ stand pipes, CIP arms, spray balls, prv, etc.
(6) 15 bbl
(1) 20 bbl
(2) 7.5 bbl
(1) automated keg washer (it cleans, but does need a little work)
(1) Roskamp 2 roller mill, w/ auger. Great mill, very little dust.
(1) Thermaline Heat x. Model# T4CH.
(1) Velo DE filter
(1) Culligan carbon water filter. Approx 5 feet tall.
(1) Puma 60 gallon Industrial Air Compressor Model#PK-6060V
(1) Columbia 800,000 BTU WL-60 Waste Oil boiler. This boiler is amazing. It can run on waste vegetable oil, so steam power is FREE. It can be converted to gas. The system incudes (1) Tempco in line oil heater, and (1) centrifuge, filter system to clean the waste oil. Easy to operate.
(1) Intertek glycol draft line chiller. Model EXTRA 1/2 hp.
(1) portable CIP pump
(1) stainless glycol reservoir tank. Approx 300 gallons.
All hoses, clamps, gaskets, Ts, elbows, sight glasses, fittings, etc. Everything you need.
Serious inquiries only. I can send photos. Everything sold AS-IS. You can email me at firstname.lastname@example.org.