Ampco AC+114MD Portable Pump Assembly ( $2,720 )
New Filters, Filtration, and Pumps / Catalog Ad Posted 11 months ago by by CPE Systems / 2791 views
The AMPCO AC+114MD is the original C-series centrifugal pump re imagined. It has kept the original casing design and popular external mechanical seal options, however it features a collar that clamps down on the drive shaft over a full 360 degrees removing the minor wobble that can occur from set screwed shafts. The impeller pin was also replaced with a threaded impeller nut that fully secures the impeller in place; there are two specialized gaskets to seal the shaft and to still allow a CIP procedure to clean behind the impeller. The collar and bolted impeller reduce rattling sounds at lower speeds.
The AC+ AMPCO pump head is attached to our stainless steel washdown motor, mounted on a Canadian made stainless steel cart and fitted with a NEMA 4X variable speed control (VFD).
FEATURES:
- 1 1/2″ X 1 1/2″ Tri-clamp connections
- Stainless steel washdown motor
- 316L stainless steel construction (wetted parts)
- 304 stainless steel adapter
- External mechanical seal
- Canadian made stainless steel cart
- NEMA 4X VFD
SEAL OPTIONS:
“D” Single mechanical external seal
“DG” Single mechanical external seal with replaceable ceramic seat
“F” Single mechanical external seal with water cascade
HORSEPOWER
1 HP:The capacity of this pump is 75 GPM and it will put out 65 ft of head pressure, ideal for microbreweries (5 – 10 BBL) and estate wineries.
1 1/2 HP:The capacity of this pump is 100 GPM and it will put out 75 ft of head pressure, ideal for microbreweries (10 – 15 BBL) and estate wineries.
2 HP:The capacity of this pump is 125 GPM and it will put out 75 ft of head pressure, ideal for microbreweries (> 15 BBL) and larger estate wineries.
3 HP The capacity of this pump is 150 GPM and it will put out 75 ft of head pressure, ideal for large microbreweries (>25 BBL) and larger estate wineries.
- Manufacturer : Ampco
- Ships From : Canada
Leave a Reply