3 vessel 2 bbl Electric Brewhouse / 3 fermenters / 3bbl Brite / Grain Mill ( $7,500 )

Hot

Used Product Ad posted 2 weeks ago in Nano Brewing Equipment by tim moriarty

Shipping will only cost cost youfuel, food and lodging, and will be transported in an enclosed 24′ trailer.

Blichmann 55 gallon Boiler Maker Electric 3 vessel system with Extensions on custom built stainless stand (total volume for each kettle is 102 gallons)
HLT
2 heating elements (1 5500w hard wired 1 5500w tri clamp removable)
3 piece ball valve on bottom outlet with dip tube
Water inlet with ball valve
50’ HERMS coil with ball valves
30” Themorwell through the lid
Blichmann Brewmometer (no longer functions correctly)
Float Switch for protecting the element

MLT
Blichmann mash screen on bottom with dip tube
3 piece ball valve on bottom outlet
First recirculation/sparge port on bottom kettle for small batches w/ ball valve and cam lock fitting for blichmann auto sparge arm
Second recirculation fitting on top kettle with cam lock fitting for blichmann auto sparge arm
30” themowell through lid
Blichmann Brewmometer (no longer functions correctly)
Mash tun has its own tipping system for emptying of grain

BK
2 5500w elements with tri clamp fittings for easy removal and cleaning
Whirlpool inlet halfway up first kettle with ball valve
1.5″ Tri clamp Bottom dump with Butterfly valve for removing trub and clean out
3 piece ball valve on wort outlet
Lid doesn’t fit snuggly on top as it warped when I had a 3” tri clamp fitting welded onto it for cleaning and for attaching CO2 for doing kettle sours

Fermenters
1 Stout 2 bbl SIngle Walled fermenter with 50′ Stainless coil through the lid
1 Ace Rotto Mold 5 bbl tank with cooling coil through the lid, 4” tri clamp port on top with 2” rotating CIP with 1.5” tri clamp fitting, Thermowell, and sample port fitting but no sample port included
1 Ace Rotto Mold 3 bbl tank with cooling coil through the lid, 1.5” tri clamp port on top, Tri Clamp Thermowell, Tri Clamp Sample Port w/ sample valve (all stainless bulkhead fittings)

Brite Tank
Glacier Single Walled 3 BBL Brite tank

Smaller Componets
Monster Mill 3 Roller Mill with 2 Hardened Rollers mounted w/ motor on cabinet
Stand is 2” stainless square tubing with 1/8” wall thickness
Mash Tun Tilting system is on stainless steel pillow mount ball bearings
Duda Diesel 42 plate heat exchanger with thermometer and aeration stone for O2 mounted to the stand with Ball Valves on the inlet and outlet
2x AC5BMD high temperature pumps with stainless gate valves to control flow of Water and Wort mounted to the stand
Stainless Steel Vent hood 6’x3’ with fan hole cut in it
Brewmation Control panel setup to control 1 element at a time and both pumps
Wort pump is also controlled by the MLT temperature so you can do step mashes through the HERMS coil
Extra basic on/off control panel with 3 additional 30 amp plugs and switches in water tight enclosure (used this when double batching to heat up the water for the next batch
All fittings on the Brew System are Stainless Ball Valves with Quick Disconnects that will come with all the high temperature silicon hoses

Contact this listing owner

Please Login or register to contact the poster of this classified ad.

To top