3 Ton Coldshot Glycol Chiller [$7,500.00]New
-To provide approximately 40,000 Btu/hr. of cooling with 50.F leaving fluid
temperature with an ambient temperature of 95.F.
-Electronic temperature controller with constant (set point & process) temperature
readout on standard units, actual and programmed temperature LED readout.
-Efficient scroll compressors, sight glass/moisture indicators, balance port expansion valves, filter drier, service
valves, stainless steel brazed plate evaporator, fan cycling head pressure controls, and low ambient controls.
Process Fluid Components:
-Stainless steel centrifugal pump, bronze “Y” strainer with 20 mesh stainless steel screen, insulated stainless steel reservoir with shoe box lid.
-High/low pressure safeties, low water flow switch, internal and/or thermal overloads for compressor and fan
motors, safety fuses for pump.
-Welded steel powder coated frame and cabinet, copper piping connections.
-5 H.P. Hermetic Scroll (Copeland Brand)
-Stanless steel I Copper brazed
PROCESS SUPPLY PUMP
– Standard Pump -3/4 H.P.
– Output 25gpm @ 30psi
– 25 GALLON -304ss
– Reservoir Insulated
– Air Cooled
– Designed for industrial use
– Copper Tube, Aluminim Fin
– 208/230 VOLT -3 Ph -Minimum service required -27 amps
– Or 460 VOLT 3 Ph -Minimum service required -15 amps
-44″ L x 32″ W x 59-1/2″ H
-4001bs Empty -600 Lbs with Water/Glycol full
Any buyer is responsible for rigging and transport of vessels.
Unit was $10,000 brand new