16-head 12oz Bottle Line (All Inclusive: conveyors, bottle rinser & dryer, labeler, on/off packing tables) ( $75,000 )
FOR SALE: 50 BPM 12 OZ Brew Bev Bottle Line: On-Pack Table, Monoblock (rinse, purge, fill, crown), Rinse Tunnel, Heated Air Dryer, Neck & Body Labeller, Off-Pack Table, Conveyors.
We used this setup from 2015-2019 before switching over to a canning line. It has everything you will need to start bottling. From start to finish the flow of the packaging procedure is: Empty bottles are loaded onto conveyor table, the bottles convey to the monoblock, the monoblock rinses, purges 2x, fills, and caps the bottles, the bottles then leave the monoblock and move through a rinse tunnel and heated air dryer, then the bottles are labelled and convey to the offpacking table.
In this setup you will have everything needed to fill, label, and on/off stack your bottles.
Upon interest we will also include our CIP procedures SOP as well as procedures on operating the bottle line.
More bottle line details:
Manufactured in 2015, this bottling line includes a 16 head counter pressure monoblock combination Rinser, Filler and Capper and all of the auxiliary systems. Included with the monoblock are a 2 stage, 2KW Air Blade Bottle drier, External Bottle Rinser, Automatic Self Adhesive Labeling machine (Body and Neck labels), all associated conveyor belts and 8ft x 4ft stainless steel bottle loading and off pack tables. The Filler in the mono block is a double evacuation, counter pressure filler using high precision mechanical filling valves on a cam driven system. Filler also includes spare tubes, gaskets and cups for clean in place service. Filler Speed is adjustable and is approximately 50 BPM. Bottle Rinser includes a sterile filter and crowner is a press type with autofeed bowl. Monoblock comes with a PLC driven Main Control Console with electronics manufactured by Mitsubishi. Many parts of this machine have been upgraded after market including stainless steel check valves, relief valves and a 1.85 KW Vacuum pump manufactured by Elmo Rietsche. A mix of spare parts including gaskets and filler tubes will be provided. This bottling line was manufactured in China by Gongda Packaging under the supervision of Brew Bev. Points of contact and original contract can be provided.
Please use the Google Drive link below to view more information, pictures, and video of the bottle line in use.
The following is the general order of operations for the bottle line:
- Empty bottles loaded onto conveyor
- Bottles funnel into the monoblock and are rinsed, purged (x2), filled, jetted (to cap on foam), and capped.
- Bottles pass through rinse tunnel
- Bottles pass through airblades / heat tunnel (to dry)
- Bottles pass through body and neck labeller
- Labelled bottles pass to the offpack table
- Finished bottles are cased and palletized
Please reach out if you have any questions.